| 40-59: Reason for no report or incomplete report
|
| 40 |
Report not filed |
| 42 |
Ground equipment failure |
| 43 |
Observation delayed |
| 44 |
Power failure |
| 45 |
Unfavorable weather conditions |
| 46 |
Low maximum altitude (less than 500m above ground) |
| 47 |
Leaking balloon |
| 48 |
Ascent not authorized for this period |
| 49 |
Alert |
| 50 |
Ascent did not extend above the 400hPa level |
| 51 |
Balloon forced down by icing conditions |
| 52 |
Balloon forced down by precipitation |
| 53 |
Atmospheric interference |
| 54 |
Local interference |
| 55 |
Fading signal |
| 56 |
Weak signal |
| 57 |
Preventive maintenance |
| 58 |
Flight equipment failure (transmitter, balloon, attachments, etc.) |
| 59 |
Any reason not listed above |
| 110-129: Code violation error in report
|
| 110 |
Id wind level flag has illegal value |
| 111 |
Temp mandatory level indicator not in expected location |
| 112 |
Temp significant level indicator not in expected location |
| 113 |
Pilot mandatory level pressure group not in expected location |
| 114 |
Pilot significant level height group not in expected location |
| 115 |
Group has invalid length |
| 116 |
Recovery attempts were halted (too many errors) |
| 117 |
Pilot significant level height is above 100mb in part BB |
| 118 |
Pilot significant level height is below 100mb in part DD |
| 119 |
Too many temp mandatory level heights encoded as "000" |
| 120 |
Id wind level flag is miscoded |