!> Get the distinct values of the key in argument contained in the index. The key must belong to the index.
!>
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref index.f90 "index.f90"
!>
!> @param indexid id of an index created from a file. The index must have been created with the key in argument.
!> @param key key for wich the values are returned
!> @param values array of values. The array must be allocated before entering this function and its size must be enough to contain all the values.
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_index_get
module procedure grib_index_get_int, &
grib_index_get_string, &
grib_index_get_real8
end interface grib_index_get
!> Get the number of distinct values of the key in argument contained in the index. The key must belong to the index.
!>
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref index.f90 "index.f90"
!>
!> @param indexid id of an index created from a file. The index must have been created with the key in argument.
!> @param key key for which the number of values is computed
!> @param size number of distinct values of the key in the index
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_index_get_size
module procedure grib_index_get_size_int
end interface grib_index_get_size
!> Select the message subset with key==value.
!>
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref index.f90 "index.f90"
!>
!> @param indexid id of an index created from a file. The index must have been created with the key in argument.
!> @param key key to be selected
!> @param value value of the key to select
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_index_select
module procedure grib_index_select_int, &
grib_index_select_string, &
grib_index_select_real8
end interface grib_index_select
!> Get the value for a key from a grib message.
!>
!> Given a \em gribid and \em key as input a \em value for the \em key is returned.
!> In some cases the \em value can be an array rather than a scalar.
!> As examples of array keys we have "values","pl", "pv" respectively the data values,
!> the list of number of points for each latitude in a reduced grid and the list of
!> vertical levels. In these cases the \em value array must be allocated by the caller
!> and their required dimension can be obtained with \ref grib_get_size. \n
!> The \em value can be integer(4), real(4), real(8), character.
!> Although each key has its own native type, a key of type integer
!> can be retrieved (with \ref grib_get) as real(4), real(8) or character.
!> Analogous conversions are always provided when possible.
!> Illegal conversions are real to integer and character to any other type.
!>
!> The \em gribid references to a grib message loaded in memory.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref get.f90 "get.f90", \ref print_data.f90 "print_data.f90"
!>
!> @see grib_new_from_file, grib_release, grib_set
!>
!>
!> @param[in] gribid id of the grib loaded in memory
!> @param[in] key key name
!> @param[out] value value can be a scalar or array of integer(4),real(4),real(8),character
!> @param[out] status GRIB_SUCCESS if OK, integer value on error
interface grib_get
module procedure grib_get_int, &
grib_get_real4, &
grib_get_real8, &
grib_get_string, &
grib_get_int_array, &
grib_get_real4_array, &
grib_get_real8_array
end interface grib_get
!> Get the size of an array key.
!>
!> To get the size of a key representing an array.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> @param gribid id of the grib loaded in memory
!> @param key name of the key
!> @param size size of the array key
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_get_size
module procedure grib_get_size_int
end interface grib_get_size
!> Create a new message in memory from an integer or character array containting the coded message.
!>
!> The message can be accessed through its gribid and it will be available\n
!> until @ref grib_release is called. A reference to the original coded\n
!> message is kept in the new message structure.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!>
!> \b Examples: \ref copy_message.f90 "copy_message.f90"
!>
!> @param gribid id of the grib loaded in memory
!> @param message array containing the coded message
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_new_from_message
module procedure grib_new_from_message_int4
module procedure grib_new_from_message_char
end interface grib_new_from_message
!> Reads a message in the buffer array from the file opened with grib_open_file.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!>
!> @param ifile id of the opened file to be used in all the file functions.
!> @param buffer buffer to be read
!> @param nbytes number of bytes to be read
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_read_from_file
module procedure grib_read_from_file_int4
module procedure grib_read_from_file_char
end interface grib_read_from_file
!> Reads nbytes bytes into the buffer from a file opened with grib_open_file.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!>
!> @param ifile id of the opened file to be used in all the file functions.
!> @param buffer buffer to be read
!> @param nbytes number of bytes to be read
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_read_bytes
module procedure grib_read_bytes_int4
module procedure grib_read_bytes_char
module procedure grib_read_bytes_real8
module procedure grib_read_bytes_real4
end interface grib_read_bytes
!> Write nbytes bytes from the buffer in a file opened with grib_open_file.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!>
!> @param ifile id of the opened file to be used in all the file functions.
!> @param buffer buffer to be written
!> @param nbytes number of bytes to be written
!> @param status GRIB_SUCCESS if OK, integer value on error
interface grib_write_bytes
module procedure grib_write_bytes_int4
module procedure grib_write_bytes_char
module procedure grib_write_bytes_real8
module procedure grib_write_bytes_real4
end interface grib_write_bytes
!> Set the value for a key in a grib message.
!>
!> The given \em value is set for the \em key in the \em gribid message.
!> In some cases the \em value can be an array rather than a scalar.
!> As examples of array keys we have "values","pl", "pv" respectively the data values,
!> the list of number of points for each latitude in a reduced grid and the list of
!> vertical levels. In these cases the \em value array must be allocated by the caller
!> and their required dimension can be obtained with \ref grib_get_size. \n
!> The gribid references to a grib message loaded in memory.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref set.f90 "set.f90"
!>
!> @see grib_new_from_file, grib_release, grib_get
!>
!> @param[in] gribid id of the grib loaded in memory
!> @param[in] key key name
!> @param[out] value value can be a scalar or array of integer(4),real(4),real(8)
!> @param[out] status GRIB_SUCCESS if OK, integer value on error
interface grib_set
module procedure grib_set_int, &
grib_set_real4, &
grib_set_real8, &
grib_set_string, &
grib_set_int_array, &
grib_set_real4_array, &
grib_set_real8_array
end interface grib_set
!> Get a value of specified index from an array key.
!>
!> Given a gribid and key name as input a value corresponding to the given index
!> is returned. The index is zero based i.e. the first element has
!> zero index, the second element index one and so on.
!> If the parameter index is an array all the values correspondig to the indexes
!> list is returned.
!> The gribid references to a grib message loaded in memory.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref nearest.f90 "nearest.f90"
!>
!> @see grib_new_from_file, grib_release, grib_get
!>
!> @param[in] gribid id of the grib loaded in memory
!> @param[in] key key name
!> @param[in] index index can be a scalar or array of integer(4)
!> @param[out] value value can be a scalar or array of integer(4),real(4),real(8)
!> @param[out] status GRIB_SUCCESS if OK, integer value on error
interface grib_get_element
module procedure grib_get_real4_element, &
grib_get_real8_element, &
grib_get_real4_elements, &
grib_get_real8_elements
end interface grib_get_element
!> Find the nearest point/points of a given latitude/longitude point.
!>
!> The value in the nearest point (or the four nearest points) is returned as well as the
!> zero based index (which can be used in @ref grib_get_element)
!> and its distance from the given point using the following
!> formula (acos(sin(lat1)*sin(lat2)+cos(lat1)*cos(lat2)*cos(lon1-lon2))).
!>
!> If the is_lsm flag is .true. the input field gribid is considered as
!> a land sea mask and the nearest land point is returned.\n
!> The nearest land point among the four neighbours is:
!> - the nearest point with land sea mask value >= 0.5
!> - the nearest without any other condition if all the four have land sea mask value <0.5.
!>
!> Arrays (real(8)) of latitude/longitude can be provided to find with one call
!> the values,indexes and distances for all the lat/lon points listed in the arrays.
!>
!> If a single latitude/longitude point is provided and outlat,outlon,value,distance,index
!> are defined as arrays with four elements the lat/lon coordinates and values, distances
!> and indexes of the four nearest points are returned.
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref nearest.f90 "nearest.f90"
!>
!> @param[in] gribid id of the grib loaded in memory
!> @param[in] is_lsm .true. if the nearest land point is required otherwise .false.
!> @param[in] inlat latitude of the point in degrees
!> @param[in] inlon longitudes of the point in degrees
!> @param[out] outlat latitude of the nearest point in degrees
!> @param[out] outlon longitude of the nearest point in degrees
!> @param[out] distance distance between the given point and its nearest
!> @param[out] index zero based index
!> @param[out] value value of the field in the nearest point
!> @param[out] status GRIB_SUCCESS if OK, integer value on error
interface grib_find_nearest
module procedure grib_find_nearest_single, &
grib_find_nearest_four_single, &
grib_find_nearest_multiple
end interface grib_find_nearest
!> Get latitude/longitude and data values.
!>
!> Latitudes, longitudes, data values arrays are returned.
!> They must be properly allocated by the caller and their required
!> dimension can be obtained with \ref grib_get_size or by getting (with \ref grib_get)
!> the value of the integer key "numberOfPoints".
!>
!> In case of error, if the status parameter (optional) is not given, the program will
!> exit with an error message.\n Otherwise the error message can be
!> gathered with @ref grib_get_error_string.
!>
!> \b Examples: \ref get_data.f90 "get_data.f90"
!>
!> @param[in] gribid id of the grib loaded in memory
!> @param[out] lats latitudes array with dimension "size"
!> @param[out] lons longitudes array with dimension "size"
!> @param[out] values data values array with dimension "size"
!> @param[out] status GRIB_SUCCESS if OK, integer value on error
interface grib_get_data
module procedure grib_get_data_real4, &
grib_get_data_real8
end interface grib_get_data