&time_control run_days = 0, run_hours = 0, run_minutes = 60, run_seconds = 0, start_year = 0001, 0001, 0001, start_month = 01, 01, 01, start_day = 01, 01, 01, start_hour = 00, 00, 00, start_minute = 00, 00, 00, start_second = 00, 00, 00, end_year = 0001, 0001, 0001, end_month = 01, 01, 01, end_day = 01, 01, 01, end_hour = 00, 00, 00, end_minute = 60, 00, 00, end_second = 00, 00, 00, history_interval_s = 120, 120, 120, frames_per_outfile = 1, 1, 1, restart = .false., io_form_history = 2 io_form_restart = 2 io_form_input = 2 io_form_boundary = 2 debug_level = 1 / &domains time_step = 0, time_step_fract_num = 1, time_step_fract_den = 2, max_dom = 1, s_we = 1, 1, 1, e_we = 103, 43, 43, s_sn = 1, 1, 1, e_sn = 103, 43, 43, s_vert = 1, 1, 1, e_vert = 51, 41, 41, dx = 50, 30, 10, dy = 50, 30, 10, ztop = 4000, 1500, 1500, grid_id = 1, 2, 3, parent_id = 0, 1, 2, i_parent_start = 0, 1, 1, j_parent_start = 0, 1, 1, parent_grid_ratio = 1, 2, 3, parent_time_step_ratio = 1, 2, 3, feedback = 1, smooth_option = 0 sr_x = 4, 0, 0 sr_y = 4, 0, 0 / &physics mp_physics = 0, 0, 0, ra_lw_physics = 0, 0, 0, ra_sw_physics = 0, 0, 0, radt = 30, 30, 30, sf_sfclay_physics = 0, 0, 0, sf_surface_physics = 0, 0, 0, bl_pbl_physics = 0, 0, 0, bldt = 0, 0, 0, cu_physics = 0, 0, 0, cudt = 0, 0, 0, isfflx = 1, ifsnow = 0, icloud = 0, num_soil_layers = 5, mp_zero_out = 0, / &fdda / &dynamics rk_ord = 3, diff_opt = 2, 2, 2, km_opt = 2, 2, 2, damp_opt = 0, zdamp = 800., 5000., 5000., dampcoef = 0.2, 0.2, 0.2 khdif = 0.05, 0.05, 0.05, kvdif = 0.05, 0.05, 0.05, smdiv = 0.1, 0.1, 0.1, emdiv = 0.01, 0.01, 0.01, epssm = 0.1, 0.1, 0.1 mix_full_fields = .true., .true., .true., non_hydrostatic = .true., .true., .true., h_mom_adv_order = 5, 5, 5, v_mom_adv_order = 3, 3, 3, h_sca_adv_order = 5, 5, 5, v_sca_adv_order = 3, 3, 3, time_step_sound = 20, 20, 20, moist_adv_opt = 1, 1, 1, scalar_adv_opt = 1, 1, 1, / &bdy_control periodic_x = .false.,.false.,.false., symmetric_xs = .false.,.false.,.false., symmetric_xe = .false.,.false.,.false., open_xs = .true., .false.,.false., open_xe = .true., .false.,.false., periodic_y = .false.,.false.,.false., symmetric_ys = .false.,.false.,.false., symmetric_ye = .false.,.false.,.false., open_ys = .true., .false.,.false., open_ye = .true., .false.,.false., nested = .false., .true., .true., / &grib2 / &namelist_quilt nio_tasks_per_group = 0, nio_groups = 1, / &fire ! be sure to set sr_x,sr_y in domains-namelist (to set refinement in x,y) ifire = 2, ! integer, = 0: no fire, 2=turn on fire model fire_fuel_read = 0, ! integer, -1: from WPS, 0= use fire_fuel_cat, 1= by altitude fire_fuel_cat = 1, ! integer, if specified which fuel category? ! ignition fire_num_ignitions = 1, ! integer, only the first fire_num_ignition used, up to 5 allowed fire_ignition_ros1 = 0.05, ! rate of spread during ignition, m/s fire_ignition_start_x1 = 2000., ! start points of ignition lines, in m from lower left corner fire_ignition_start_y1 = 2000., ! start points of ignition lines, in m from lower left corner fire_ignition_end_x1 = 2000., ! end points of ignition lines, in m from lower left corner fire_ignition_end_y1 = 3000., ! end points of ignition lines, in m from lower left corner fire_ignition_radius1 = 80., ! all within this radius will ignite, > fire mesh step fire_ignition_start_time1 = 120., ! sec for ignition from the start fire_ignition_end_time1 =145., ! sec for ignition from the start fire_ignition_ros2 = 0.05, ! rate of spread during ignition, m/s fire_ignition_start_x2 = 2000., ! start points of ignition lines, in m from lower left corner fire_ignition_start_y2 = 500., ! start points of ignition lines, in m from lower left corner fire_ignition_end_x2 = 2000., ! end points of ignition lines, in m from lower left corner fire_ignition_end_y2 = 1900., ! end points of ignition lines, in m from lower left corner fire_ignition_radius2 = 18., ! all within this radius will ignite, > fire mesh step fire_ignition_start_time2 = 3., ! sec for ignition from the start ! end ignition for sfire fire_ignition_end_time2 =503., ! sec for ignition from the start! end ignition for sfire fire_wind_height = 1., ! height to interpolate winds to for calculating fire spread rate ! ! verbosity fire_print_msg = 1, ! 1 print fire debugging messages fire_print_file = 0, ! 1 write files for matlab ! ! experiments ! ! fire_const_time = -1., ! (s) if >0, time from start to stop fire evolution and keep heat output constant ! fire_const_grnhfx = -1, ! (W/s) if both >=0, use this flux (meant to be used when fire_const_time=ignition time) ! fire_const_grnqfx = -1, ! (W/s) if both >=0, use this flux (meant to be used when fire_const_time=ignition time) ! fire_test_steps=0, ! >0 = on first call, do specified number of steps and terminate (testing only) fire_mountain_type=1, ! in ideal: 0=none, 1= hill, 2=EW ridge, 3=NS ridge fire_mountain_height=100., ! (m) ideal mountain height fire_mountain_start_x=1750., ! (m) coord of start of the mountain from lower left corner (just like ignition) fire_mountain_start_y=1750., ! (m) coord of start of the mountain from lower left corner (just like ignition) fire_mountain_end_x=3250., ! (m) coord of end of the mountain from lower left corner (just like ignition) fire_mountain_end_y=3250., ! (m) coord of end of the mountain from lower left corner (just like ignition) fire_topo_from_atm=1, ! 0 = fire mesh topo set from fine-res data, 1 = populate by interpolating from atmosphere delt_perturbation = 0.0, ! Temperature perturbation for creating cold (negative) / warm (positive) bubble [K], 0 turns it off !xrad_perturbation = 10000.0, ! Horizontal radius of the bubble in E-W direction [m] !yrad_perturbation = 10000.0, ! Horizontal radius of the bubble in N-S direction [m] !zrad_perturbation = 1500.0, ! Vertical radius of the bubble [m] !hght_perturbation = 1500.0, ! Perturbation height - height at which the warm/cold bubble will be suspended [m] ! ! method switches for developers only, do not change! ! fire_boundary_guard = -1, ! integer, number of cells to stop when fire close to the domain boundary, -1 turn off fire_fuel_left_irl=2, ! refinement to integrate fuel_left, must be even fire_fuel_left_jrl=2, ! refinement to integrate fuel_left, must be even fire_atm_feedback=1.0, ! real, multiplier for heat fluxes, 1.=normal, 0.=turn off two-way coupling fire_back_weight=0.5, ! RK timestepping coefficient, 0=forward, 0.5=Heun fire_grows_only=1, ! if >0 level set function cannot increase = fire can only grow fire_viscosity=0.4, ! artificial viscosity in level set method (max 1, needed with fire_upwinding=0) fire_upwinding=3, ! 0=none, 1=standard, 2=godunov, 3=eno, 4=sethian fire_fuel_left_method=1, ! for now, use 1 only fire_lfn_ext_up=1.0, ! 0.=extend level set function at boundary by reflection, 1.=always up fire_advection=0, ! 0 = cawfe, 1 = use abs speed/slope in spread rate, then project on normal to fireline /