#!/bin/bash
set -xa
date -u

###################################################################
# Set DEBUG LEVEL - modifies info in execution trace prompt string
###################################################################
export DEBUG_LEVEL=${DEBUG_LEVEL=1}
case $DEBUG_LEVEL in
  1) export PS4='+ ${SECONDS}s + ' ;;       # add seconds (this is typical case)
  0) export PS4='+ ';;                      # don't include seconds (useful if
                                            #  want to diff output from 2 runs)
  2) export PS4='+ ${SECONDS}s:L$LINENO + ';;         # add script line #
  3) export PS4='+ ${SECONDS}s:${0##*/}:L$LINENO + ';;# add script name & line #
  4) export PS4='+ ${0##*/}:L$LINENO + ';;  # script name & line (no seconds)
  *) echo "Unrecognized DEBUG_LEVEL.  Stay with current PS4 setting";;
esac

########################################
# Check that required variables are set
########################################
set +x
echo
echo cyc is ${cyc:?"###FATAL ERROR \"cyc\" is not set"}
echo envir is ${envir:?"###FATAL ERROR \"envir\" is not set"}
echo job is ${job:?"###FATAL ERROR \"job\" is not set"}
echo DATAROOT is ${DATAROOT:?"###FATAL ERROR \"DATAROOT\" is not set"}
echo
set -x

###############################
# Print out version information
###############################
set +x
echo
echo "####################################################################"
echo
echo "OBSPROC version is ${obsproc_ver:-not set}"
echo "BUFR_DUMP version used by this job, for dump and dumplist, is" \
     "${bufr_dump_ver:-not set}"
echo "grib_util module version used by this job is ${grib_util_ver:-not set}"
if [[ $(echo $LOADEDMODULES | egrep -c "(^|:)bufr_dump/") -eq 0 ]];
     then echo "bufr_dump is required but not loaded! Exiting...";
     exit;
fi
echo
echo "####################################################################"
echo
set -x

#####################################################################
## List modules loaded for this job.
######################################################################
set +x
echo
echo "####################################################################"
echo
      module list
echo
echo "####################################################################"
echo
set -x

###########################
# Specify NET and RUN Name
###########################
export obsNET=${obsNET:-obsproc}
export NET=${NET:-rtma}

set +x
echo
echo obsNET is ${obsNET:?"###FATAL ERROR \"obsNET\" is not set"}
echo NET is ${NET:?"###FATAL ERROR \"NET\" is not set"}
echo
set -x

echo $job | grep "_ru_"
err_ru=$?
if [ $err_ru = 0 ]; then
  export RUN=${RUN:-rtma_ru}  # rapid update w/ sub-hourly cycles
  set +x
  echo
  echo cycM is ${cycM:?"###FATAL ERROR \"cycM\" is not set"}
  echo
  set -x
else
  export RUN=${RUN:-rtma}     # normal, hourly cycle run
fi

echo RUN is ${RUN:?"###FATAL ERROR \"RUN\" is not set"}


##############################
# Specify cycle and time-mark
##############################
export cycle=t${cyc}z
export tmmark=tm00

###############################
# Create new working directory
###############################
jobid=${jobid:-${job}.$(hostname -s).$$}
export DATA=${DATA:-$DATAROOT/${jobid}}
rm -rf $DATA
mkdir -p $DATA
cd $DATA
export pgmout=OUTPUT.$$

######################################
# Set job log file for postmsg output
######################################
jlogfile=${jlogfile:-${DATA}/jlogfile}

#############################################
# SENDCOM  - Copy files to $COMOUT directory
# SENDECF  - Flag Events on ECFLOW
# SENDDBN  - Alert output file to TOC
#############################################
export SENDCOM=${SENDCOM:-YES}
export SENDECF=${SENDECF:-YES}
export SENDDBN=${SENDDBN:-YES}

##########################
# Specify Execution Areas
##########################

# ------------------------
# Paths for obsproc items
# ------------------------
export HOMEobsproc=${HOMEobsproc:\
-${PACKAGEROOT:?}/${obsNET}/${obsproc_ver:?\
"###FATAL ERROR \"obsproc_ver\" is not set"}}

export SCRIPTSobsproc=${SCRIPTSobsproc:-$HOMEobsproc/scripts}
export EXECobsproc=${EXECobsproc:-$HOMEobsproc/exec}
export USHobsproc=${USHobsproc:-$HOMEobsproc/ush}

#########################################################################
## Add some prod utilities to working directory
##########################################################################
echo "step ############# break ##############################" > ./break
cp $UTILROOT/ush/err_chk   .; chmod +x err_chk
cp $UTILROOT/ush/err_exit  .; chmod +x err_exit
cp $UTILROOT/ush/prep_step .; chmod +x prep_step
cp $UTILROOT/ush/postmsg   .; chmod +x postmsg
cp $UTILROOT/ush/setpdy.sh .; chmod +x setpdy.sh

##########################################
# Run setpdy and initialize PDY variables
##########################################
set +x; echo -e "\n---> path to setpdy.sh below is: `which setpdy.sh`"; set -x
setpdy.sh
. $DATA/PDY

# Imported variable cycM, if it exists, contains cycle time minutes
#  If cycM is imported, reset exported cycle to 4-digit value t<HHMM>z
#  (Note: This value for $cycle will now be used in this script and in
#         downstream script exdump_post.sh.ecf)

[ -n "$cycM" ]  &&  cycle=t${cyc}${cycM}z

#########################
# Define COM directories
#########################
export COMIN_ROOT=${COMIN_ROOT:-${COMROOT:-""}}

if [[ "$RUN_ENVIR" == nco ]]; then
  export COMIN=${COMIN:-$(compath.py ${envir}/${obsNET}/${obsproc_ver}/${RUN}.${PDY})}
  export COMOUT=${COMOUT:-$(compath.py -o ${obsNET}/$obsproc_ver/${RUN}.${PDY})}
  mkdir -m 775 -p $COMOUT
else
  export COMIN=${COMIN:-${COMIN_ROOT:?}/${obsNET}/${obsproc_ver}/${RUN}.${PDY}}

# COMOUT_ROOT for developers defaults to unique $DATA/com directory as root to
#  prevent job from writing into a non-unique directory that might already have 
#  output in it from a previous checkout run for the same cycle
# -----------------------------------------------------------------------------
  export COMOUT_ROOT=${COMOUT_ROOT:-${DATA}/com}
  export COMOUT=${COMOUT:-${COMOUT_ROOT:?}/${obsNET}/${obsproc_ver}/${RUN}.${PDY}}
  mkdir -m 755 -p $COMOUT
fi

# comin and comin_m1 are paths to dump status files for bufr_avgdata.sh
export comin=${comin:-$(compath.py ${envir}/${obsNET}/${obsproc_ver}/${RUN}.${PDY})}
export comin_m1=${comin_m1:-$(compath.py ${envir}/${obsNET}/${obsproc_ver}/${RUN}.${PDYm1})}

# ---------------------------
# Paths for non-obsproc items
# ---------------------------

# directory path to data count averaging executed in model script and in
#  bufr_avgdata.sh
# ----------------------------------------------------------------------
export HOMEarch=${HOMEarch:-$(compath.py ${envir}/${obsNET}/${obsproc_ver}/sdm_rtdm/${NET})}

#  .. AVGDarch_OUT is directory path for avg tables output by model script
#     --------------------------------------------------------------------
if [[ "$RUN_ENVIR" == nco ]]; then
  export AVGDarch_OUT=$HOMEarch/avgdata
  mkdir -p $AVGDarch_OUT
else
  export AVGDarch_OUT=${AVGDarch_OUT:-${COMOUT_ROOT:?}/${obsNET}/${obsproc_ver}/sdm_rtdm/${RUN}/avgdata}
  mkdir -p $AVGDarch_OUT
fi

#  .. OBCNTarch is directory path to write new status files to & read all status
#     files from {can WRITE to this location only if COPY=YES (the default)}
#     --------------------------------------------------------------------------
export OBCNTarch=${OBCNTarch:-$HOMEarch/obcount_30day}

#################################################
# SETUP RTMA DATA DUMP POST PROCESSING VARIABLES
#################################################

#########################################################
# Specify variables specific to this execution of script
#########################################################
export PROCESS_DATACOUNTS=NO # Not processed in RTMA run
export PROCESS_REMOREST=${PROCESS_REMOREST:-YES}
export PROCESS_UNBLKBUFR=${PROCESS_UNBLKBUFR:-NO}
export PROCESS_LISTERS=${PROCESS_LISTERS:-YES}

export MPMD=${MPMD:-"NO"}   # do not run listdumps in parallel by default

# Data count average tables are generated in the 23Z run only
if [ "$cyc" = '23' -a -z "$cycM" ]; then
   export PROCESS_AVGTABLES=${PROCESS_AVGTABLES:-YES}
else
   export PROCESS_AVGTABLES=${PROCESS_AVGTABLES:-NO}
fi

env

#####################
# Execute the script
#####################
$SCRIPTSobsproc/exdump_post.sh
eval err_${RUN}_dump_post=$?
eval [[ \$err_${RUN}_dump_post -ne 0 ]] && $DATA/err_exit

echo "$SITE `hostname`  --  `date -u`" > $COMOUT/where_${cycle}_${RUN}_dump_post_ran

> $COMOUT/obsproc_version_for_${cycle}_${RUN}_dump_post_run
[ -n "$obsproc_ver" ]  &&  \
 echo "OBSPROC version is $obsproc_ver" >> \
 $COMOUT/obsproc_version_for_${cycle}_${RUN}_dump_post_run

[ -n "$bufr_dump_ver" ]  &&  \
 echo "BUFR_DUMP version used by this job is  $bufr_dump_ver" >> \
 $COMOUT/obsproc_version_for_${cycle}_${RUN}_dump_post_run


if [ "$KEEPDATA" != YES ]; then
   cd $DATAROOT
   rm -rf $DATA
fi
date -u

exit