# Makefile.in generated by automake 1.11.1 from Makefile.am. # examples/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from help@hdfgroup.org. # # HDF5 Library Examples Makefile(.in) # # We can't tell automake about example programs, because they need to be # built using h5cc (or h5fc, etc.) instead of the standard compilers. # This creates some extra work for us. pkgdatadir = $(datadir)/hdf5 pkgincludedir = $(includedir)/hdf5 pkglibdir = $(libdir)/hdf5 pkglibexecdir = $(libexecdir)/hdf5 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/run-c-ex.sh.in $(srcdir)/testh5cc.sh.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am \ $(top_srcdir)/config/examples.am TESTS = subdir = examples ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = run-c-ex.sh testh5cc.sh CONFIG_CLEAN_VPATH_FILES = AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ SOURCES = DIST_SOURCES = am__tty_colors = \ red=; grn=; lgn=; blu=; std= DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal ADD_PARALLEL_FILES = no AMTAR = ${SHELL} /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9/bin/missing --run tar # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. # AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. AM_CFLAGS = -std=c99 -O AM_CPPFLAGS = -I/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_BSD_SOURCE -D_POSIX_C_SOURCE=199506L -DNDEBUG -UH5_DEBUG_API AM_CXXFLAGS = AM_DEFAULT_VERBOSITY = 0 AM_FCFLAGS = -O3 AM_LDFLAGS = -L/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib/lib AM_MAKEFLAGS = AR = ar AS = as # Set the paths for AFS installs of autotools for Linux machines # Ideally, these tools should never be needed during the build. AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 AWK = gawk BYTESEX = little-endian CC = cc CCDEPMODE = depmode=gcc3 CC_VERSION = /opt/cray/pe/craype/2.7.10/bin/cc CFLAGS = CLEARFILEBUF = yes CODESTACK = no CONFIG_DATE = Fri Jul 21 19:52:39 UTC 2023 CONFIG_MODE = production CONFIG_USER = ops.para@dlogin08 CPP = cc -E CPPFLAGS = CXX = CC CXXCPP = CC -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = CXX_VERSION = /opt/cray/pe/craype/2.7.10/bin/CC CYGPATH_W = echo DEBUG_PKG = DEFAULT_API_VERSION = v18 DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DEPRECATED_SYMBOLS = yes DIRECT_VFD = no DLLTOOL = dlltool DSYMUTIL = DUMPBIN = DYNAMIC_DIRS = -R/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib/lib -R/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib/lib ECHO_C = ECHO_N = -n ECHO_T = EGREP = /u/ops.para/bin/grep -E EXEEXT = EXTERNAL_FILTERS = deflate(zlib) # Make sure that these variables are exported to the Makefiles F9XMODEXT = mod F9XMODFLAG = -I F9XSUFFIXFLAG = FC = ftn FC2003 = FCFLAGS = FCFLAGS_f90 = FCLIBS = -L/opt/cray/pe/mpich/8.1.7/ofi/intel/19.0/lib -L/apps/spack/curl/7.72.0/intel/19.1.3.304/yjtxk7r7mujxmhu4penm6bhtsva6ednv/lib -L/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib -L/apps/spack/libpng/1.6.37/intel/19.1.3.304/4ohkronuhlyherusoszzrmur5ewvlwzh/lib -L/apps/spack/jasper/2.0.25/intel/19.1.3.304/sjib74krrorkyczqpqah4tvewmlnqdx4/lib64 -L/pe/intel/compilers_and_libraries_2020.4.304/linux/ipp/lib/intel64 -L/pe/intel/compilers_and_libraries_2020.4.304/linux/compiler/lib/intel64_lin -L/pe/intel/compilers_and_libraries_2020.4.304/linux/mkl/lib/intel64_lin -L/pe/intel/compilers_and_libraries_2020.4.304/linux/tbb/lib/intel64/gcc4.8 -L/apps/spack/jasper/2.0.25/intel/19.1.3.304/sjib74krrorkyczqpqah4tvewmlnqdx4/lib64/../lib64 -L/apps/spack/jasper/2.0.25/intel/19.1.3.304/sjib74krrorkyczqpqah4tvewmlnqdx4/lib64/../lib64/ -L/usr/lib64/gcc/x86_64-suse-linux/7/ -L/usr/lib64/gcc/x86_64-suse-linux/7/../../../../lib64 -L/usr/lib64/gcc/x86_64-suse-linux/7/../../../../lib64/ -L/lib/../lib64 -L/lib/../lib64/ -L/usr/lib/../lib64 -L/usr/lib/../lib64/ -L/apps/spack/curl/7.72.0/intel/19.1.3.304/yjtxk7r7mujxmhu4penm6bhtsva6ednv/lib/ -L/apps/spack/zlib/1.2.11/intel/19.1.3.304/hjotqkckeoyt6j6tibalwzrlfljcjtdh/lib/ -L/apps/spack/libpng/1.6.37/intel/19.1.3.304/4ohkronuhlyherusoszzrmur5ewvlwzh/lib/ -L/apps/spack/jasper/2.0.25/intel/19.1.3.304/sjib74krrorkyczqpqah4tvewmlnqdx4/lib64/ -L/pe/intel/compilers_and_libraries_2020.4.304/linux/ipp/lib/intel64/ -L/pe/intel/compilers_and_libraries_2020.4.304/linux/compiler/lib/intel64_lin/ -L/pe/intel/compilers_and_libraries_2020.4.304/linux/mkl/lib/intel64_lin/ -L/pe/intel/compilers_and_libraries_2020.4.304/linux/tbb/lib/intel64/gcc4.8/ -L/usr/lib64/gcc/x86_64-suse-linux/7/../../../../x86_64-suse-linux/lib/ -L/usr/lib64/gcc/x86_64-suse-linux/7/../../../ -L/lib64 -L/lib/ -L/usr/lib64 -L/usr/lib -lmpifort_intel -lmpi_intel -limf -lm -lpthread -lifport -lifcoremt -lsvml -lipgo -lirc -lirc_s -ldl FC_VERSION = /opt/cray/pe/craype/2.7.10/bin/ftn FGREP = /u/ops.para/bin/grep -F FILTERS = shuffle,fletcher32,nbit,scaleoffset FSEARCH_DIRS = GPFS = no GREP = /u/ops.para/bin/grep H5_CFLAGS = -std=c99 -O H5_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -DNDEBUG -UH5_DEBUG_API H5_CXXFLAGS = H5_CXX_SHARED = no H5_FCFLAGS = -O3 H5_FORTRAN_SHARED = no H5_LDFLAGS = H5_LONE_COLON = yes H5_VERSION = 1.8.9 HADDR_T = HAVE_DMALLOC = no HAVE_FORTRAN_2003 = yes HDF5_HL = yes HDF5_INTERFACES = fortran c++ HDF_CXX = yes HDF_FORTRAN = yes HDF_FORTRAN2003 = yes HID_T = HL = hl HL_FOR = HSIZE_T = HSSIZE_T = INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INSTRUMENT = no INSTRUMENT_LIBRARY = no LARGEFILE = yes LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64 LDFLAGS = LIBOBJS = LIBS = -lz -lm LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LL_PATH = LN_S = ln -s LTLIBOBJS = LT_STATIC_EXEC = MAINT = # MAKEINFO = ${SHELL} /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9/bin/missing --run makeinfo MANIFEST_TOOL = : MKDIR_P = /u/ops.para/bin/mkdir -p MPE = no MPI_GET_SIZE = NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJECT_NAMELEN_DEFAULT_F = OBJEXT = o OTOOL = OTOOL64 = PACKAGE = hdf5 PACKAGE_BUGREPORT = help@hdfgroup.org PACKAGE_NAME = HDF5 PACKAGE_STRING = HDF5 1.8.9 PACKAGE_TARNAME = hdf5 PACKAGE_URL = PACKAGE_VERSION = 1.8.9 PARALLEL = no PATH_SEPARATOR = : PERL = perl PTHREAD = RANLIB = ranlib ROOT = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9 RUNPARALLEL = RUNSERIAL = R_INTEGER = R_LARGE = SEARCH = VPATH=$(srcdir) $(top_builddir)/src $(top_srcdir)/src SED = /u/ops.para/bin/sed SETX = set -x SET_MAKE = SHELL = /bin/sh SIZE_T = STATIC_EXEC = no STATIC_SHARED = STRICT_FORMAT_CHECKS = no STRIP = strip TESTPARALLEL = THREADSAFE = no TIME = time TR = /usr/bin/tr TRACE_API = no UNAME_INFO = Linux dlogin08 5.3.18-150300.59.106-default #1 SMP Mon Dec 12 13:16:24 UTC 2022 (774239c) x86_64 x86_64 x86_64 GNU/Linux USE_FILTER_DEFLATE = yes USE_FILTER_FLETCHER32 = yes USE_FILTER_NBIT = yes USE_FILTER_SCALEOFFSET = yes USE_FILTER_SHUFFLE = yes USE_FILTER_SZIP = no USINGMEMCHECKER = no VERSION = 1.8.9 WORDS_BIGENDIAN = no abs_builddir = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9/examples abs_srcdir = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9/examples abs_top_builddir = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9 abs_top_srcdir = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9 ac_ct_AR = ac_ct_CC = cc ac_ct_CXX = ac_ct_DUMPBIN = ac_ct_FC = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share # Install directories that automake doesn't know about docdir = $(exec_prefix)/doc dvidir = ${docdir} enable_shared = no enable_static = yes exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/sorc/hdf5-1_8_9/bin/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /u/ops.para/bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /lfs/h1/ops/para/packages/nwps.v1.4.10/lib/hdf5/1.8.9 program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_build_prefix = ../ top_builddir = .. top_srcdir = .. # Shell commands used in Makefiles RM = rm -f CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. # We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below # has been removed. According to the official description of DESTDIR by Gnu at # http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is # prepended to the normal and complete install path that it precedes for the # purpose of installing in a temporary directory which is useful for building # rpms and other packages. The '/' after ${DESTDIR} will be followed by another # '/' at the beginning of the normal install path. When DESTDIR is empty the # path then begins with '//', which is incorrect and causes problems at least for # Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with # shared libraries instead of static libraries H5CC = ${DESTDIR}$(bindir)/h5cc H5CC_PP = ${DESTDIR}$(bindir)/h5pcc H5FC = ${DESTDIR}$(bindir)/h5fc H5FC_PP = ${DESTDIR}$(bindir)/h5pfc H5CPP = ${DESTDIR}$(bindir)/h5c++ ACLOCAL_AMFLAGS = "-I m4" # The trace script; this is used on source files from the C library to # insert tracing macros. TRACE = perl $(top_srcdir)/bin/trace # .chkexe files are used to mark tests that have run successfully. # .chklog files are output from those tests. # *.clog are from the MPE option. CHECK_CLEANFILES = *.chkexe *.chklog *.clog $(EXTLINK_DIRS) *.h5 #TEST_PROG_PARA = ph5example # Example programs. # Don't tell automake about them, because if it knew they were programs, # it would try to compile them instead of using the h5cc script. # Use the boilerplate in config/examples.am instead. TEST_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \ h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers \ h5_ref2reg h5_extlink h5_elink_unix2win h5_shared_mesg TEST_SCRIPT = testh5cc.sh # Install files # List all file that should be installed in examples directory INSTALL_FILES = h5_write.c h5_read.c h5_extend_write.c h5_chunk_read.c \ h5_compound.c h5_group.c h5_select.c h5_attribute.c h5_mount.c \ h5_reference.c h5_drivers.c h5_extlink.c h5_elink_unix2win.c \ h5_ref2reg.c h5_shared_mesg.c ph5example.c INSTALL_SCRIPT_FILES = run-c-ex.sh INSTALL_TOP_SCRIPT_FILES = run-all-ex.sh INSTALL_TOP_FILES = README # The external link examples demonstrate how to use paths; they need # directories to be created to do this. EXTLINK_DIRS = red blue u2w # Example directory # Note: no '/' after DESTDIR. Explanation in commence.am EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/c EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples #LD_LIBRARY_PATH = $(LL_PATH) # Assume that all tests in this directory are examples, and tell # conclude.am when to build them. EXAMPLE_PROG = $(TEST_PROG_PARA) $(TEST_PROG) EXTRA_PROG = $(EXAMPLE_PROG) # We need to tell automake what to clean MOSTLYCLEANFILES = *.raw *.meta *.o CLEANFILES = $(TEST_PROG) $(TEST_PROG_PARA) # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/examples.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign examples/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): run-c-ex.sh: $(top_builddir)/config.status $(srcdir)/run-c-ex.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ testh5cc.sh: $(top_builddir)/config.status $(srcdir)/testh5cc.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: installcheck-local maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ mostlyclean-local pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-local .MAKE: check-am install-am install-strip .PHONY: all all-am all-local check check-TESTS check-am clean \ clean-generic clean-libtool distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installcheck-local installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-local # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. # This tells the Makefiles that these targets are not files to be built but # commands that should be executed even if a file with the same name already # exists. .PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ build-tests check-clean check-install check-p check-s check-vfd \ install-doc lib progs tests uninstall-doc _exec_check-s _test help help: @$(top_srcdir)/bin/makehelp # How to build examples, using installed version of h5cc #$(EXTRA_PROG): $(H5CC_PP) # $(H5CC_PP) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c; $(EXTRA_PROG): $(H5CC) $(H5CC) $(H5CCFLAGS) $(CFLAGS) -o $@ $(srcdir)/$@.c; # Two of the examples depend on files created by other examples. h5_read.chkexe_: h5_write.chkexe_ h5_chunk_read.chkexe_: h5_extend_write.chkexe_ $(EXTLINK_DIRS): echo $(mkdir_p) $@ $(mkdir_p) $@ # List dependencies for each program. Normally, automake would take # care of this for us, but if we tell automake about the programs it # will try to build them with the normal C compiler, not h5cc. This is # an inelegant way of solving the problem. # All programs share the same build rule and a dependency on the main hdf5 # library above. h5_chunk_read: $(srcdir)/h5_chunk_read.c h5_compound: $(srcdir)/h5_compound.c h5_extend_write: $(srcdir)/h5_extend_write.c h5_group: $(srcdir)/h5_group.c h5_write: $(srcdir)/h5_write.c h5_read: $(srcdir)/h5_read.c h5_select: $(srcdir)/h5_select.c h5_attribute: $(srcdir)/h5_attribute.c h5_mount: $(srcdir)/h5_mount.c h5_reference: $(srcdir)/h5_reference.c h5_ref2reg: $(srcdir)/h5_ref2reg.c h5_drivers: $(srcdir)/h5_drivers.c ph5example: $(srcdir)/ph5example.c h5_dtransform: $(srcdir)/h5_dtransform.c h5_extlink: $(srcdir)/h5_extlink.c $(EXTLINK_DIRS) h5_elink_unix2win: $(srcdir)/h5_elink_unix2win.c $(EXTLINK_DIRS) h5_shared_mesg: $(srcdir)/h5_shared_mesg.c # How to create EXAMPLEDIR if it doesn't already exist $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ $(EXAMPLETOPDIR): -$(top_srcdir)/bin/mkdirs $@ # Install and uninstall rules. We install the source files, not the # example programs themselves. install-data-local: @$(MAKE) $(AM_MAKEFLAGS) install-examples uninstall-local: @$(MAKE) $(AM_MAKEFLAGS) uninstall-examples install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) @for f in X $(INSTALL_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\ chmod a-x $(EXAMPLEDIR)/$$f;\ fi; \ done @for f in X $(INSTALL_SCRIPT_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $$f $(EXAMPLEDIR)/. || exit 1);\ fi; \ done @for f in X $(INSTALL_TOP_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \ chmod a-x $(EXAMPLETOPDIR)/$$f;\ fi; \ done @for f in X $(INSTALL_TOP_SCRIPT_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLETOPDIR)/. || exit 1); \ fi; \ done uninstall-examples: @if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \ set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES); \ fi @if test -n "$(INSTALL_SCRIPT_FILES)" -a -d $(EXAMPLEDIR); then \ set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_SCRIPT_FILES); \ fi @if test -n "$(INSTALL_TOP_FILES)" -a -d $(EXAMPLETOPDIR); then \ set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_FILES); \ fi @if test -n "$(INSTALL_TOP_SCRIPT_FILES)" -a -d $(EXAMPLETOPDIR); then \ set -x; cd $(EXAMPLETOPDIR) && $(RM) $(INSTALL_TOP_SCRIPT_FILES); \ fi installcheck-local: @if test "$(STATIC_SHARED)" = "static, shared"; then \ H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \ $(MAKE) $(AM_MAKEFLAGS) clean; \ H5CCFLAGS="" $(MAKE) $(AM_MAKEFLAGS) check; \ elif test "$(STATIC_SHARED)" = "shared"; then \ H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check; \ else \ $(MAKE) $(AM_MAKEFLAGS) check; \ fi # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else # in the directory (e.g., for Fortran type detection) lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # General rule for recursive cleaning targets. Like the rule above, # but doesn't require building BUILT_SOURCES. check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target # is depreciated. install-doc uninstall-doc: @echo "Nothing to be done." # clean up files generated by tests so they can be re-run. build-check-clean: $(RM) -rf $(CHECK_CLEANFILES) # run check-clean whenever mostlyclean is run mostlyclean-local: build-check-clean # check-install is just a synonym for installcheck check-install: installcheck # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: @$(MAKE) build-check-s @$(MAKE) build-check-p # Actual execution of check-s. build-check-s: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) # The dummy.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ else \ echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ fi # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ cmd=$(@:.chkexe_=);\ tname=`basename $$cmd`;\ chkname=`basename $(@:.chkexe_=.chkexe)`;\ log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ else \ echo "Testing $${tname} $(TEST_FLAGS)"; \ echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $${chkname} || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ echo "============================"; \ fi # Actual execution of check-p. build-check-p: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ fi; \ done @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: $(LIB) $(PROGS) $(TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: