#------------------------------------------------------------------------ 
# Domain File
# Original Author(s): Roberto Padilla-Hernandez,Douglas Gaer
# Alex Gibbs, Pablo Santos,Tony Freeman  
# File Creation Date: 06/01/2012
# Date Last Modified: 11/08/14 by alex.gibbs@onaa.gov
#
# Version control: 1.33
#
# Support Team:
#
# Contributors: 
#
# ----------------------------------------------------------------------- 
# ---------------------- Description and Details ------------------------ 
# ----------------------------------------------------------------------- 
#
# File used to setup a geographical domain for SWAN and WW3
#
# ----------------------------------------------------------- 
#========================================================================
#                                    MTR                                =
#  GEOGRAPHICAL DOMAIN, GEOGRAFICAL RESOLUTION AND OUTPUT TIME STEP     =
#========================================================================
export SITEID="MTR"
export REGIONID="WR"
export NELAT="39.40"
export NELON="-120.74"
export SWLAT="35.00"
export SWLON="-125.80"
export RES="2.5"
export TSTEP="1"
#
#========================================================================
#                  NESTED GRID CONFIGURATION                            =
# These nested grids are non-telescopic grids i.e all of them are       =
# nested in the main grid, and get the boundary conditions only from it =
#                                                                       =
#========================================================================
# NESTGRIDS: Number of nested grids, if = 0, nested grids and 
# location numbers below will be ignore regardless of input specifications
#
# STATN=STA for STATIONARY RUNS, STAT=NON for NON-STATIONARY RUNS
# The default values is NONstationary for CG1 and STAtionary for the
# nested grids. Change this only if you know what you are doing.
# You can choose STA or NON for a particular nested grid.
#  
export NESTGRIDS="3"
export NESTINCG1="YES"
#
# Greater SF Bay Area Nest
export NELATN1="38.4"
export NELONN1="-122.3"
export SWLATN1="37.3"
export SWLONN1="-123.3"
export RESN1="1."
export TSTEPN1="1"
export STATN1="NON"
#
# Greater Monterey Bay Area Nest
export NELATN2="37.0"
export NELONN2="-121.7"
export SWLATN2="36.2"
export SWLONN2="-122.2"
export RESN2="0.5"
export TSTEPN2="1"
export STATN2="NON"
#
# Wind-only domain
export NEST3INCG1="NO"
export NELATN3="39.40"
export NELONN3="-120.74"
export SWLATN3="35.00"
export SWLONN3="-125.80"
export RESN3="2.5"
export TSTEPN3="1"
export STATN3="NON"
#
#========================================================================
#                    SPECTRA OUTPUT LOCATIONS                           =
#========================================================================
# Specta points defined as space delimited list of:
#   "name1:lat1:lon1 name2:lat2:lon2 name3:lat3:lon3 name4:lat4:lon4 name5:lat5:lon5 ...."
#
export SPECPOINTS="46042:36.785:-122.469 46028:35.741:-121.884 46239:36.342:-122.102 46236:36.761:-121.947 46240:36.626:-121.907 46214:37.946:-123.469 46013:38.242:-123.301 46012:37.363:-122.881 46026:37.755:-122.839 46237:37.786:-122.634"
#
#========================================================================
#                    WAVE TRACKING (and WAVE PARTITION) ON/OFF          =
#   SET: SUBDOMTRN, GEOGRAPH RESOL and TOLERANCE WAVETRACK PARAMETERS   =
#========================================================================
# IF WAVE TRACKING IS REQUIRED THEN WVTRCK="ON", OTHER WISE SET IT AS "OFF"
# IF WVTRCK IS "ON", ADDTIONAL INFORMATION IS REQUIRED, SEE BELOW
#
export WVTRCK="ON"
#
# IF WAVE TRACKING IS REQUIRED EXACTLY OVER THE COMPUTATIONAL GRID AND SAME SPATIAL 
# RESOLUTION: SET WVTONCG="1"  
# IF USER WANTS TO CHANGE ANYONE OF THE PARAMETERS THEN WVTONCG="0" AND USER MUST GIVE 
# ALL INFORMATION FOR THE DOMAIN OR SUBDOMAIN AND GEOGRAPHICAL RESOLUTION.
# BE CAREFULL, IF THERE IS ANY SPECTRAL OUTPUT LOCATIONS OUT OF THE NEW (REDUCED) DOMAIN
# FOR WAVE TRACKING NWPS WILL ABORT. 
# (This will be change in a new version, the user can get 1d-spectra but not g-h plots).
export WVTONCG="0"
export NELATWT="39.40"
export NELONWT="-120.74"
export SWLATWT="35.00"
export SWLONWT="-125.80"
export GEORESWT="3.5"
#
# PARAMETERS FOR TRACKING ALGORITHM for WVTONCG=0 or =1 THIS IS ALWAYS READ 
# *CAUTION* CHANGE THEM ONLY IF YOU KNOW WHAT YOU ARE DOING
# RECOMENDED VALUES WVTRKPA="10. 1. 0.25 0.1 10. 1."
#               dirKnob, perKnob, hsKnob, wetPts, dirTimeKnob, tpTimeKnob
#export WVTRKPA="10. 1. 0.25 0.1 10. 1."
# Exp EKA Setup
export WVTRKPA="50. 5. 0.25 0.1 50. 5."
#
#========================================================================
#                   CURRENTS DEFINITION (SEE SWAN MANUAL)               =
#========================================================================
#export CURRL1="INPGRID CUR ............................."
#export CURRL2="READINP CUR ............................."
#
#========================================================================
#                    BOUNDARY CONDITIONS (SEE SWAN MANUAL)              =
#========================================================================
# IF BOUNDARY CONDITIONS WILL BE USED then BOUNDCOND=1, Otherwise =0; 
# Setting up BOUNDCOND here to zero will permanently disable BCs. 
# If you leave it as 1 the user will still have the option to disable 
# them from the interactive Run_NWPS GUI.
#
export BOUNCOND="1"
export FTPPAT1="gfswave"
export FTPPAT1B="gfswave"
export FTPPAT2="NW-MTR"
export NFTPATTEMPTS="3"
export WAVECPS="gfswave.NW-MTR51.spec.swan,gfswave.NW-MTR60.spec.swan"
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD BOUNDARY COMMAND LINES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE BOUNARY
# CONDITIONS (BOUNCOND="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# BOUNDARY CONDITIONS (BOUNCOND="1") NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL 
# INPUT FILES WITH NOT COMMENT CHARACTER
#
#$BOUNDARY COMMAND LINES
#BOUN SEG XY 234.2 39.40 235.95 39.40 VAR FILE 0.00 'gfswave.NW-MTR51.spec.swan'    1 &
#0.50 'gfswave.NW-MTR72.spec.swan'    1 &
#1.00 'gfswave.NW-MTR73.spec.swan'    1 &
#1.50 'gfswave.NW-MTR74.spec.swan'    1 &
#1.75 'gfswave.NW-MTR75.spec.swan'    1 
#$
#BOUN SEG XY 234.2 35.00 234.2 39.40 VAR FILE 0.00 'gfswave.NW-MTR60.spec.swan'    1 &
#0.40 'gfswave.NW-MTR59.spec.swan'    1 &
#0.90 'gfswave.NW-MTR58.spec.swan'    1 &
#1.40 'gfswave.NW-MTR57.spec.swan'    1 &
#1.90 'gfswave.NW-MTR56.spec.swan'    1 &
#2.40 'gfswave.NW-MTR55.spec.swan'    1 &
#2.90 'gfswave.NW-MTR54.spec.swan'    1 &
#3.40 'gfswave.NW-MTR53.spec.swan'    1 &
#3.90 'gfswave.NW-MTR52.spec.swan'    1 &
#4.40 'gfswave.NW-MTR51.spec.swan.cp' 1
#$ 
#BOUN SEG XY 239.2 35.00 234.2 35.00 VAR FILE 0.00 'gfswave.NW-MTR70.spec.swan'    1 &
#0.50 'gfswave.NW-MTR69.spec.swan'    1 &
#1.00 'gfswave.NW-MTR68.spec.swan'    1 &
#1.50 'gfswave.NW-MTR67.spec.swan'    1 &
#2.00 'gfswave.NW-MTR66.spec.swan'    1 &
#2.50 'gfswave.NW-MTR65.spec.swan'    1 &
#3.00 'gfswave.NW-MTR64.spec.swan'    1 &
#3.50 'gfswave.NW-MTR63.spec.swan'    1 &
#4.00 'gfswave.NW-MTR62.spec.swan'    1 &
#4.50 'gfswave.NW-MTR61.spec.swan'    1 &
#5.00 'gfswave.NW-MTR60.spec.swan.cp' 1
#$END BOUNSEG
#
#========================================================================
#                    RIP CURRENT PROGRAM (SEE NWPS MANUAL)              =
#========================================================================
# IF RIP CURRENT PROGRAM WILL BE RUN, then RIPCONT=1, Otherwise =0;
# Setting up RIPCONT here to zero will permanently disable RIP program.
#
export RIPPROG="0"
export RIPDOMAIN="CG2"
export RIPCONT="5m"
#
#___________________________________________________________________________
# RAY Section: Define a pair of rays to drop data out along critical contours
#              for rip current program.
#
# Example: for data output every 2km along a 5m bathy contour
#
# RAY 'rayname' xp yp xq yq int xp yp xq yq
#
# RAY 'ray1' 282.85 34.628 282.85 34.62 2000 283.00 34.655 283.00 34.62
#
# ISOLINE '5mcont' 'ray1' BOTtom 10
# TABLE '5mcont' HEAD '5mtable' HSIGN TPS PDIR OUTPUT 20110825.1200 3.0 HR
#_____________________________________________________________________________
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD RIP COMMAND LINES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE RIP
# CURRENTS (RIPCONT="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# BOUNDARY CONDITIONS (BOUNCOND="1") NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL
# INPUT FILES WITH NOT COMMENT CHARACTER
# POIN '5mcont' 279.887  25.8725 
#
#$RIP LINES
#$ Ray for 5m and 20m contour data.
#$
#RAY 'ray1' 288.80 41.95 289.68 41.95 100 288.80 43.15 289.68 43.15
#ISOLINE '5mcont' 'ray1' BOTtom 5
#TABLE '5mcont' HEAD '5m_contour_CG2' TIME XP YP HSIGN TPS DIR DSPR VEL WATL WIND OUTPUT 20141030.0000 1.0 HR
#$
#RAY 'ray2' 288.80 41.95 289.68 41.95 100 288.80 43.15 289.68 43.15
#ISOLINE '20mcont' 'ray1' BOTtom 20
#TABLE '20mcont' HEAD '20m_contour_CG2' TIME XP YP HSIGN TPS DIR DSPR VEL WATL WIND OUTPUT 20141030.0000 1.0 HR
#$
#$END RIP
#
#========================================================================
#                    RUNUP PROGRAM (SEE NWPS MANUAL)              =
#========================================================================
# IF RUNUP PROGRAM WILL BE RUN, then RIPCONT=1, Otherwise =0;
# Setting up RIPCONT here to zero will permanently disable RIP program.
#
export RUNUPPROG="0"
export RUNUPDOMAIN="CG1"
export RUNUPCONT="20m"