#------------------------------------------------------------------------ 
# Domain File
# Original Author(s): Roberto Padilla-Hernandez,Douglas Gaer
# Alex Gibbs, Pablo Santos,Tony Freeman  
# File Creation Date: 06/01/2012
# Date Last Modified: 11/08/14 by alex.gibbs@onaa.gov
#
# Version control: 1.33
#
# Support Team:
#
# Contributors: 
#
# ----------------------------------------------------------------------- 
# ---------------------- Description and Details ------------------------ 
# ----------------------------------------------------------------------- 
#
# File used to setup a geographical domain for SWAN and WW3
#
# ----------------------------------------------------------- 
#========================================================================
#                                    LOX                                =
#  GEOGRAPHICAL DOMAIN, GEOGRAFICAL RESOLUTION AND OUTPUT TIME STEP     =
#========================================================================
export SITEID="LOX"
export REGIONID="WR"
export NELAT="36.10"
export NELON="-117.30"
export SWLAT="32.60"
export SWLON="-123.36"
export RES="4.0"
export TSTEP="1"
#
#========================================================================
#                  NESTED GRID CONFIGURATION                            =
# These nested grids are non-telescopic grids i.e all of them are       =
# nested in the main grid, and get the boundary conditions only from it =
#                                                                       =
#========================================================================
# NESTGRIDS: Number of nested grids, if = 0, nested grids and 
# location numbers below will be ignore regardless of input specifications
#
# STATN=STA for STATIONARY RUNS, STAT=NON for NON-STATIONARY RUNS
# The default values is NONstationary for CG1 and STAtionary for the
# nested grids. Change this only if you know what you are doing.
# You can choose STA or NON for a particular nested grid.
#  
export NESTGRIDS="2"
export NESTINCG1="YES"
#
# LOX Nest: Port of Long Beach
export NELATN1="33.77"
export NELONN1="-117.81"
export SWLATN1="33.52"
export SWLONN1="-118.41"
export RESN1=".5"
export TSTEPN1="1"
export STATN1="NON"
#
# Wind-only domain
export NEST2INCG1="NO"
export NELATN2="36.10"
export NELONN2="-117.30"
export SWLATN2="32.60"
export SWLONN2="-123.36"
export RESN2="5.0"
export TSTEPN2="1"
export STATN2="NON"
#
#========================================================================
#                    SPECTRA OUTPUT LOCATIONS                           =
#========================================================================
# Specta points defined as space delimited list of:
#   "name1:lat1:lon1 name2:lat2:lon2 name3:lat3:lon3 name4:lat4:lon4 name5:lat5:lon5 ...."
#
#export SPECPOINTS="46028:35.741:-121.884 46219:33.221:-119.881 46069:33.674:-120.212 46221:33.855:-118.633"
#export SPECPOINTS="buoy028:35.74:-121.88 buoy219:33.22:-119.88 buoy069:33.67:-120.21 buoy221:33.86:-118.63"
export SPECPOINTS="ChanCtr:33.7016550822898:-118.181491576029 ChanSt:33.673117:-118.178567 CloBrWa:33.723283:-118.183708 SanPed:33.617800:-118.316750 SanPedS:33.577433:-118.181567 46028:35.74:-121.88 46219:33.22:-119.88 46069:33.67:-120.21 46221:33.86:-118.63 46222:33.618:-118.317 46253:33.578:-118.184 46256:33.7003:-118.2007 46011:34.956:-121.019 46053:34.252:-119.853 46054:34.265:-120.477 46025:33.749:-119.053 46218:34.454:-120.782 46223:33.458:-117.784"
#
#========================================================================
#                    WAVE TRACKING (and WAVE PARTITION) ON/OFF          =
#   SET: SUBDOLOXN, GEOGRAPH RESOL and TOLERANCE WAVETRACK PARAMETERS   =
#========================================================================
# IF WAVE TRACKING IS REQUIRED THEN WVTRCK="ON", OTHER WISE SET IT AS "OFF"
# IF WVTRCK IS "ON", ADDTIONAL INFORMATION IS REQUIRED, SEE BELOW
#
export WVTRCK="ON"
#
# IF WAVE TRACKING IS REQUIRED EXACTLY OVER THE COMPUTATIONAL GRID AND SAME SPATIAL 
# RESOLUTION: SET WVTONCG="1"  
# IF USER WANTS TO CHANGE ANYONE OF THE PARAMETERS THEN WVTONCG="0" AND USER MUST GIVE 
# ALL INFORMATION FOR THE DOMAIN OR SUBDOMAIN AND GEOGRAPHICAL RESOLUTION.
# BE CAREFULL, IF THERE IS ANY SPECTRAL OUTPUT LOCATIONS OUT OF THE NEW (REDUCED) DOMAIN
# FOR WAVE TRACKING NWPS WILL ABORT. 
# (This will be change in a new version, the user can get 1d-spectra but not g-h plots).
export WVTONCG="0"
export NELATWT="36.10"
export NELONWT="-117.30"
export SWLATWT="32.60"
export SWLONWT="-123.36"
export GEORESWT="3.5"
#
# PARAMETERS FOR TRACKING ALGORITHM for WVTONCG=0 or =1 THIS IS ALWAYS READ 
# *CAUTION* CHANGE THEM ONLY IF YOU KNOW WHAT YOU ARE DOING
# RECOMENDED VALUES WVTRKPA="10. 1. 0.25 0.1 10. 1."
#               dirKnob, perKnob, hsKnob, wetPts, dirTimeKnob, tpTimeKnob
#export WVTRKPA="10. 1. 0.25 0.1 10. 1."
# Exp EKA Setup
export WVTRKPA="50. 5. 0.25 0.1 50. 5."
#
#========================================================================
#                   CURRENTS DEFINITION (SEE SWAN MANUAL)               =
#========================================================================
#export CURRL1="INPGRID CUR ............................."
#export CURRL2="READINP CUR ............................."
#
#========================================================================
#                    BOUNDARY CONDITIONS (SEE SWAN MANUAL)              =
#========================================================================
# IF BOUNDARY CONDITIONS WILL BE USED then BOUNDCOND=1, Otherwise =0; 
# Setting up BOUNDCOND here to zero will permanently disable BCs. 
# If you leave it as 1 the user will still have the option to disable 
# them from the interactive Run_NWPS GUI.
#
export BOUNCOND="1"
export FTPPAT1="gfswave"
export FTPPAT1B="gfswave"
export FTPPAT2="NW-LOX"
export NFTPATTEMPTS="3"
export WAVECPS="gfswave.NW-LOX51.spec.swan,gfswave.NW-LOX58.spec.swan"
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD BOUNDARY COMMAND LINES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE BOUNARY
# CONDITIONS (BOUNCOND="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# BOUNDARY CONDITIONS (BOUNCOND="1") NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL 
# INPUT FILES WITH NOT COMMENT CHARACTER
#
#$BOUNDARY COMMAND LINES
#BOUN SEG XY 238.14 36.10 236.64 36.10 VAR FILE 0.00 'gfswave.NW-LOX62.spec.swan'    1 &
#0.50 'gfswave.NW-LOX61.spec.swan'    1 &
#1.00 'gfswave.NW-LOX60.spec.swan'    1 &
#1.50 'gfswave.NW-LOX58.spec.swan'    1 
#$
#BOUN SEG XY 236.64 36.10 236.64 32.60 VAR FILE 0.00 'gfswave.NW-LOX58.spec.swan.cp'    1 &
#0.50 'gfswave.NW-LOX57.spec.swan'    1 &
#1.00 'gfswave.NW-LOX56.spec.swan'    1 &
#1.50 'gfswave.NW-LOX55.spec.swan'    1 &
#2.00 'gfswave.NW-LOX54.spec.swan'    1 &
#2.50 'gfswave.NW-LOX53.spec.swan'    1 &
#3.00 'gfswave.NW-LOX52.spec.swan'    1 &
#3.50 'gfswave.NW-LOX51.spec.swan'    1
#$ 
#BOUN SEG XY 242.64 32.60 236.64 32.60 VAR FILE 0.00 'gfswave.NW-LOX75.spec.swan'    1 &
#0.50 'gfswave.NW-LOX74.spec.swan'    1 &
#1.00 'gfswave.NW-LOX73.spec.swan'    1 &
#1.50 'gfswave.NW-LOX72.spec.swan'    1 &
#2.00 'gfswave.NW-LOX71.spec.swan'    1 &
#2.50 'gfswave.NW-LOX70.spec.swan'    1 &
#3.00 'gfswave.NW-LOX69.spec.swan'    1 &
#3.50 'gfswave.NW-LOX68.spec.swan'    1 &
#4.00 'gfswave.NW-LOX67.spec.swan'    1 &
#4.50 'gfswave.NW-LOX66.spec.swan'    1 &
#5.00 'gfswave.NW-LOX65.spec.swan'    1 &
#5.50 'gfswave.NW-LOX64.spec.swan'    1 &
#6.00 'gfswave.NW-LOX51.spec.swan.cp' 1
#NUM DIRimpl cdd=1 cdlim=2
#$END BOUNSEG
#
#========================================================================
#                    RIP CURRENT PROGRAM (SEE NWPS MANUAL)              =
#========================================================================
# IF RIP CURRENT PROGRAM WILL BE RUN, then RIPCONT=1, Otherwise =0;
# Setting up RIPCONT here to zero will permanently disable RIP program.
#
export RIPPROG="0"
export RIPDOMAIN="CG2"
export RIPCONT="5m"
#
#___________________________________________________________________________
# RAY Section: Define a pair of rays to drop data out along critical contours
#              for rip current program.
#
# Example: for data output every 2km along a 5m bathy contour
#
# RAY 'rayname' xp yp xq yq int xp yp xq yq
#
# RAY 'ray1' 282.85 34.628 282.85 34.62 2000 283.00 34.655 283.00 34.62
#
# ISOLINE '5mcont' 'ray1' BOTtom 10
# TABLE '5mcont' HEAD '5mtable' HSIGN TPS PDIR OUTPUT 20110825.1200 3.0 HR
#_____________________________________________________________________________
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD RIP COMMAND LINES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE RIP
# CURRENTS (RIPCONT="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# BOUNDARY CONDITIONS (BOUNCOND="1") NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL
# INPUT FILES WITH NOT COMMENT CHARACTER
# POIN '5mcont' 279.887  25.8725 
#
#$RIP LINES
#$ Ray for 5m and 20m contour data.
#$
#RAY 'ray1' 288.80 41.95 289.68 41.95 100 288.80 43.15 289.68 43.15
#ISOLINE '5mcont' 'ray1' BOTtom 5
#TABLE '5mcont' HEAD '5m_contour_CG2' TIME XP YP HSIGN TPS DIR DSPR VEL WATL WIND OUTPUT 20141030.0000 1.0 HR
#$
#RAY 'ray2' 288.80 41.95 289.68 41.95 100 288.80 43.15 289.68 43.15
#ISOLINE '20mcont' 'ray1' BOTtom 20
#TABLE '20mcont' HEAD '20m_contour_CG2' TIME XP YP HSIGN TPS DIR DSPR VEL WATL WIND OUTPUT 20141030.0000 1.0 HR
#$
#$END RIP
#
#========================================================================
#                    RUNUP PROGRAM (SEE NWPS MANUAL)              =
#========================================================================
# IF RUNUP PROGRAM WILL BE RUN, then RIPCONT=1, Otherwise =0;
# Setting up RIPCONT here to zero will permanently disable RIP program.
#
export RUNUPPROG="0"
export RUNUPDOMAIN="CG1"
export RUNUPCONT="20m"
#
#========================================================================
#                    OBSTACLES (SEE SWAN MANUAL)              =
#========================================================================
# IF OBSTACLES WILL BE USED, then USEOBSTA=1, Otherwise =0;
# Setting up OBSTACLE here to zero will permanently disable OBSTACLES.
#
export USEOBSTA="1"
export OBSTADOMAIN="CG2"
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD OBSTACLES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE
# OBSTACLES (USEOBSTA="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# IT NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL
# INPUT FILES WITH NOT COMMENT CHARACTER
#
#$OBSTACLES LINES
#$
#OBSTACLE TRANSM 0.0 REFL 0.00 LINE &
#241.71667 33.710000 &
#241.73333 33.703333 &
#241.79333 33.723333 &
#241.86333 33.723333
#
#$END OBSTACLES
#