February 1996
Appendix B -- UTM Zone Codes
The Universal Transverse Mercator (UTM) Coordinate System uses zone codes
instead of specific projection parameters. The table that follows lists
UTM zone codes as used by GCTPc Projection Transformation Package.
Zone C.M. Range Zone C.M. Range
---- ---- ----- ---- ---- -----
01 177W 180W-174W 31 003E 000E-006E
02 171W 174W-168W 32 009E 006E-012E
03 165W 168W-162W 33 015E 012E-018E
04 159W 162W-156W 34 021E 018E-024E
05 153W 156W-150W 35 027E 024E-030E
06 147W 150W-144W 36 033E 030E-036E
07 141W 144W-138W 37 039E 036E-042E
08 135W 138W-132W 38 045E 042E-048E
09 129W 132W-126W 39 051E 048E-054E
10 123W 126W-120W 40 057E 054E-060E
11 117W 120W-114W 41 063E 060E-066E
12 111W 114W-108W 42 069E 066E-072E
13 105W 108W-102W 43 075E 072E-078E
14 099W 102W-096W 44 081E 078E-084E
15 093W 096W-090W 45 087E 084E-090E
16 087W 090W-084W 46 093E 090E-096E
17 081W 084W-078W 47 099E 096E-102E
18 075W 078W-072W 48 105E 102E-108E
19 069W 072W-066W 49 111E 108E-114E
20 063W 066W-060W 50 117E 114E-120E
21 057W 060W-054W 51 123E 120E-126E
22 051W 054W-048W 52 129E 126E-132E
23 045W 048W-042W 53 135E 132E-138E
24 039W 042W-036W 54 141E 138E-144E
25 033W 036W-030W 55 147E 144E-150E
26 027W 030W-024W 56 153E 150E-156E
27 021W 024W-018W 57 159E 156E-162E
28 015W 018W-012W 58 165E 162E-168E
29 009W 012W-006W 59 171E 168E-174E
30 003W 006W-000E 60 177E 174E-180W
Obtained from Software Documentation for GCTP General Cartographic
Transformation Package: National Mapping Program Technical Instructions,
U.S. Geological Survey, National Mapping Division, Oct 1990,
Note: The following source contains UTM zones plotted on a world map:
Snyder, John P. Map Projections--A Working Manual: U.S.
Geological Survey Professional Paper 1395 (Supersedes USGS
Bulletin 1532), United States Government Printing Office,
Washington D.C. 1987. p. 42.