#!/bin/bash
# --------------------------------------------------------------------------- #
# matrix.base : Core of setting up matrix of regression test (v2). #
# #
# Remarks: #
# - This code uses three temporary files, #
# matrix.head: This file can pre-exist with batch queue data etc. to be #
# set in matrix.go. If not, the head will start as a bash #
# script. #
# matrix.body: All options, separated out to allow for switch filtering. #
# matrix.tail: Ending identification. #
# - This script generates the file "matrix" that can then be executed #
# interactively and/or in batch, and can be edited by hand as needed. #
# - Version 2 is set up to minimize compilations, using the sort_switch and #
# comp_switch utilities. #
# #
# Hendrik L. Tolman #
# August 2013 #
# December 2013 #
# #
# Copyright 2013 National Weather Service (NWS), #
# National Oceanic and Atmospheric Administration. All rights #
# reserved. WAVEWATCH III is a trademark of the NWS. #
# No unauthorized use without permission. #
# #
# --------------------------------------------------------------------------- #
# 1. Set up
# 1.a Check environment parameters needed to be set up in calling script.
for par in mpi np nr nth rtst ww3 shrd dist omp \
prop1D prop2D time fetch hur1mg \
multi01 multi02 multi03 multi04 multi05 \
hybd shwtr unstr pdlib smcgr rtd mudice infgrv \
uost assim calendar confignc oasis \
esmf ufs ufscoarse rstrt_b4b nth_b4b npl_b4b grib \
multi06 multi07 multi08 multi09
do
eval " value=\$$par"
# echo "$par = $value"
if [ -z "$value" ]
then
echo "error matrix.base: parameter $par not set ..."
exit 1
fi
done
# 1.b Check on existence of matrix.head - - - - - - - - - - - - - - - - - - -
if [ ! -f matrix.head ]
then
echo "#!/bin/sh" > matrix.head
fi
rm -f matrix.body
rm -f matrix.tail
# 1.c Output to ID script - - - - - - - - - - - - - - - - - - - - - - - - - -
echo " echo ' '" >> matrix.head
echo " echo ' **********************************************'" >> matrix.head
echo " echo ' *** WAVEWATCH III matrix of regression tests ***'">> matrix.head
echo " echo ' **********************************************'" >> matrix.head
echo " echo ' '" >> matrix.head
echo " echo ' Tests for single CPU codes : $shrd'" >> matrix.head
echo " echo ' Tests for multiple CPU codes (MPI) : $dist'" >> matrix.head
echo " echo ' Tests for multiple CPU codes (OMP) : $omp'" >> matrix.head
echo " echo ' Tests for threaded multiple CPU codes (MPI/OMPH) : $hybd'" >> matrix.head
echo " echo ' '" >> matrix.head
echo " echo ' 1D pure propagation tests : $prop1D'" >> matrix.head
echo " echo ' 2D pure propagation tests : $prop2D'" >> matrix.head
echo " echo ' Growth curves (time) : $time'" >> matrix.head
echo " echo ' Growth curves (fetch) : $fetch'" >> matrix.head
echo " echo ' Shallow water tests : $shwtr'" >> matrix.head
echo " echo ' Unstructured grid tests : $unstr'" >> matrix.head
echo " echo ' SMC grid tests : $smcgr'" >> matrix.head
echo " echo ' Rotated pole tests : $rtd'" >> matrix.head
echo " echo ' Hurricane with one moving grid : $hur1mg'" >> matrix.head
echo " echo ' Mud/Ice and wave interaction tests : $mudice'" >> matrix.head
echo " echo ' Second harmonic generation tests : $infgrv'" >> matrix.head
echo " echo ' Multi 01 (wet and dry) : $multi01'" >> matrix.head
echo " echo ' Multi 02 (basic nesting) : $multi02'" >> matrix.head
echo " echo ' Multi 03 (nesting and overlap) : $multi03'" >> matrix.head
echo " echo ' Multi 04 (swell on mount/current) : $multi04'" >> matrix.head
echo " echo ' Multi 05 (hurricane 3 moving grds) : $multi05'" >> matrix.head
echo " echo ' Multi 06 (curv. + reg. grds) : $multi06'" >> matrix.head
echo " echo ' Multi 07 (unstr. + reg. grds) : $multi07'" >> matrix.head
echo " echo ' Multi 08 (with ice) : $multi08'" >> matrix.head
echo " echo ' Multi 09 (SMC multi grid) : $multi09'" >> matrix.head
echo " echo ' Assim Update of the restart file : $assim'" >> matrix.head
echo " echo ' OASIS coupling : $oasis'" >> matrix.head
echo " echo ' Calendar type : $calendar'" >> matrix.head
echo " echo ' ESMF Coupling : $esmf'" >> matrix.head
echo " echo ' The Unified Forecast System : $ufs'" >> matrix.head
echo " echo ' grib file field output : $grib'" >> matrix.head
echo " echo ' Restart Reproducibility : $rstrt_b4b'" >> matrix.head
echo " echo ' MPI task Reproducibility : $npl_b4b'" >> matrix.head
echo " echo ' Thread Reproducibility : $nth_b4b'" >> matrix.head
echo " echo ' Configurable netCDF generation : $confignc'" >> matrix.head
echo " echo ' '" >> matrix.head
if [ -n "$filter" ]
then
echo " echo ' Filter for tests : $filter'" >> matrix.head
echo " echo ' '" >> matrix.head
fi
# --------------------------------------------------------------------------- #
# 2. Here come all tests, sorted by identical switch files #
# --------------------------------------------------------------------------- #
# switch_PR1[_MPI] cases, pure propagation, (mostly) no sources
if [ "$shrd" = 'y' ]
then
if [ "$prop1D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.1" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.2" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.3" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.4" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.5" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp1.6" >> matrix.body
fi
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_curv -g curv $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_a -g a $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_b -g b $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -w work_PR1 $ww3 ww3_tp2.12" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.13" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_TRPL -g TRPL $ww3 ww3_tp2.13" >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1 $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1_a -m grdset_a $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_b -m grdset_b $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_c -m grdset_c $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_d -m grdset_d $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1_a -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_b -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_d -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_e -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_PR1_a -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_b -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_f -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1 -w work_PR1_g -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$dist" = 'y' ]
then
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_curv_MPI -g curv -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_a_MPI -g a -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_b_MPI -g b -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.12" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 ww3_tp2.13" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_TRPL_MPI -g TRPL -f -p $mpi -n $np $ww3 ww3_tp2.13" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI -f -p $mpi -n $np $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_d2 -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR1_MPI -w work_PR1_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1_MPI -w work_REF_PR1_MPI -i input_REF -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$prop2D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR1 -w work_REF_PR1 -i input_REF $ww3 ww3_tp2.5" >> matrix.body
fi
# switch_PR2_UNO[_MPI] cases, pure propagation, (mostly) no sources
if [ "$shrd" = 'y' ]
then
if [ "$prop1D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.1" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.2" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.3" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.4" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.5" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp1.6" >> matrix.body
fi
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_curv -g curv $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_a -g a $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_b -g b $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_a -m grdset_a $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_b -m grdset_b $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_c -m grdset_c $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_d -m grdset_d $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_a -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_b -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_d -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_e -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_a -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_b -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_f -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO -w work_PR2_UNO_g -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$dist" = 'y' ]
then
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_curv_MPI -g curv -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_a_MPI -g a -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_b_MPI -g b -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI -f -p $mpi -n $np $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_d2 -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_PR2_UNO_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO_MPI -w work_REF_PR2_UNO_MPI -i input_REF -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$prop2D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UNO -w work_REF_PR2_UNO -i input_REF $ww3 ww3_tp2.5" >> matrix.body
fi
# switch_PR2_UQ[_MPI] cases, pure propagation, (mostly) no sources
if [ "$shrd" = 'y' ]
then
if [ "$prop1D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.1" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.2" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.3" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.4" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.5" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp1.6" >> matrix.body
fi
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_curv -g curv $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_a -g a $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_b -g b $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_a -m grdset_a $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_b -m grdset_b $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_c -m grdset_c $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_d -m grdset_d $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_a -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_b -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_d -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_e -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_a -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_b -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_f -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ -w work_PR2_UQ_g -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$dist" = 'y' ]
then
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_curv_MPI -g curv -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_a_MPI -g a -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_b_MPI -g b -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI -f -p $mpi -n $np $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_d2 -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_PR2_UQ_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ_MPI -w work_REF_PR2_UQ_MPI -i input_REF -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$prop2D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR2_UQ -w work_REF_PR2_UQ -i input_REF $ww3 ww3_tp2.5" >> matrix.body
fi
# switch_PR3_UNO[_MPI] cases, pure propagation, (mostly) no sources
if [ "$shrd" = 'y' ]
then
if [ "$prop1D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.1" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.2" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.3" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.4" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.5" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp1.6" >> matrix.body
fi
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_curv -g curv $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_a -g a $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_b -g b $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_a -m grdset_a $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_b -m grdset_b $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_c -m grdset_c $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_d -m grdset_d $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_a -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_b -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_d -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_e -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_a -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_b -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_f -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO -w work_PR3_UNO_g -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_a_c -m grdset_a -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_b_c -m grdset_b -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_c_c -m grdset_c -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_d_c -m grdset_d -g curv $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_a_c -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_b_c -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_c_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_d_c -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_e_c -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_a_c -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_b_c -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_f_c -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_g_c -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi06" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_SCRIP -w work_PR3_UNO_d -m grdset_d $ww3 mww3_test_06" >> matrix.body
fi
fi
if [ "$dist" = 'y' ]
then
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_curv_MPI -g curv -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_a_MPI -g a -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_b_MPI -g b -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI -f -p $mpi -n $np $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_d2 -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_PR3_UNO_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_a_c -m grdset_a -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_b_c -m grdset_b -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_c_c -m grdset_c -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_d_c -m grdset_d -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_a_c -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_b_c -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_c_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_d_c -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_d2_c -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_e_c -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_b_c -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_c_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_d_c -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UNO_MPI_SCRIP -w work_PR3_UNO_MPI_e_c -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
fi
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO_MPI -w work_REF_PR3_UNO_MPI -i input_REF -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$prop2D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UNO -w work_REF_PR3_UNO -i input_REF $ww3 ww3_tp2.5" >> matrix.body
fi
# switch_PR3_UQ[_MPI] cases, pure propagation, (mostly) no sources
if [ "$shrd" = 'y' ]
then
if [ "$prop1D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo "$rtst -w work_PR3_UQ $ww3 ww3_tp1.7" >> matrix.body
echo "$rtst -w work_PR3_UQ $ww3 ww3_tp1.8" >> matrix.body
echo "$rtst -i input_BJ -w work_BJ_PR3_UQ $ww3 ww3_tp1.8" >> matrix.body
echo "$rtst -w work_PR3_UQ $ww3 ww3_tp1.9" >> matrix.body
echo "$rtst -N -w work_PR3_UQ $ww3 ww3_tp1.11" >> matrix.body
echo "$rtst -i input2 -N -w work_PR3_UQ $ww3 ww3_tp1.11" >> matrix.body
fi
if [ "$unstr" = 'y' ]
then
echo "$rtst -s ST0 -w work_ST0 $ww3 ww3_tp2.6" >> matrix.body
echo "$rtst -s ST0 -w work_ST0 $ww3 ww3_tp2.7" >> matrix.body
echo "$rtst -s ST4 -w work_ST4 $ww3 ww3_tp2.6" >> matrix.body
fi
if [ "$prop1D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.1" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.2" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.3" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.4" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.5" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp1.6" >> matrix.body
fi
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_curv -g curv $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_a -g a $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_b -g b $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -w work_PR3_UQ $ww3 ww3_tp2.8" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 ww3_tp2.13" >> matrix.body
echo "$rtst -w work_PR3_UQ $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -w work_5km -g 5km $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -i input_rho -w work_PR3_UQ_RHO $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s ST4 -i input_rho -w work_ST4FLX5 $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s ST6 -i input_rho -w work_ST6FLX5 $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s TIDE -w work_TIDE $ww3 ww3_tp2.18" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_a -m grdset_a $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_b -m grdset_b $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_c -m grdset_c $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_d -m grdset_d $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_a -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_b -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_d -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_e -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_a -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_b -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_f -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ -w work_PR3_UQ_g -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_a_c -m grdset_a -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_b_c -m grdset_b -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_c_c -m grdset_c -g curv $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_d_c -m grdset_d -g curv $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_a_c -m grdset_a $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_b_c -m grdset_b $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_c_c -m grdset_c $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_d_c -m grdset_d $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_e_c -m grdset_e $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_a_c -m grdset_a $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_b_c -m grdset_b $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_f_c -m grdset_f $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_g_c -m grdset_g $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi06" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_SCRIP -w work_PR3_UQ_d -m grdset_d $ww3 mww3_test_06" >> matrix.body
fi
if [ "$multi07" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -w work_PR3_UQ -m grdset $ww3 mww3_test_07" >> matrix.body
fi
fi
if [ "$dist" = 'y' ]
then
if [ "$prop2D" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp1.9" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.1" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.2" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.3" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_curv_MPI -g curv -f -p $mpi -n $np $ww3 ww3_tp2.4" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_a_MPI -g a -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_b_MPI -g b -f -p $mpi -n $np $ww3 ww3_tp2.9" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.13" >> matrix.body
echo "$rtst -s MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s MPI -w work_MPI_5km -g 5km -f -p $mpi -n $np $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s MPI -i input_rho -w work_PR3_UQ_RHO_MPI -f -p $mpi -n $np $ww3 ww3_tp2.15" >> matrix.body
echo "$rtst -s TIDE_MPI -w work_TIDE_MPI -f -p $mpi -n $np $ww3 ww3_tp2.18" >> matrix.body
fi
if [ "$multi01" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI -f -p $mpi -n $np $ww3 mww3_test_01" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_a -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_d2 -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_b -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_d -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_PR3_UQ_MPI_e -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi02" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_a_c -m grdset_a -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_b_c -m grdset_b -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_c_c -m grdset_c -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_d_c -m grdset_d -g curv -f -p $mpi -n $np $ww3 mww3_test_02" >> matrix.body
fi
if [ "$multi03" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_a_c -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_b_c -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_c_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_d_c -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_d2_c -m grdset_d2 -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_e_c -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_03" >> matrix.body
fi
if [ "$multi04" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_b_c -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_c_c -m grdset_c -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_d_c -m grdset_d -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIP -w work_PR3_UQ_MPI_e_c -m grdset_e -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
echo "$rtst -s PR3_UQ_MPI_SCRIPNC -w work_PR3_UQ_MPI_NC_b_c -m grdset_b -f -p $mpi -n $np $ww3 mww3_test_04" >> matrix.body
fi
if [ "$multi08" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s ST4_PR3_UQ_MPI -w work_ST4_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_08" >> matrix.body
echo "$rtst -i i_lowres_multi -w work_lowres -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_08" >> matrix.body
fi
fi
if [ "$prop2D" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ_MPI -w work_REF_PR3_UQ_MPI -i input_REF -f -p $mpi -n $np $ww3 ww3_tp2.5" >> matrix.body
fi
if [ "$prop2D" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s PR3_UQ -w work_REF_PR3_UQ -i input_REF $ww3 ww3_tp2.5" >> matrix.body
fi
# time limited growth, no switch sharing here
if [ "$time" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s ST1 -w work_ST1 $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST1_RWND -w work_ST1_RWND $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST2 -w work_ST2 $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST3 -w work_ST3 $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST4 -w work_ST4 $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST4 -w work_ST4_T700 -g ST4_T700 -N $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST4_WRT -w work_ST4_WRT $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST4_GMD -w work_ST4_GMD $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST4_TSA -w work_ST4_TSA $ww3 ww3_ts1" >> matrix.body
echo "$rtst -s ST6 -w work_ST6 $ww3 ww3_ts1" >> matrix.body
echo "$rtst -w work_NL5 -i input_nl5_matrix $ww3 ww3_ts1" >> matrix.body
fi
# fetch limited growth, no switch sharing here
if [ "$fetch" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s ST1_PR1 -w work_ST1_PR1 $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST1_PR2_UQ -w work_ST1_PR2_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST1_PR2_UNO -w work_ST1_PR2_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST1_PR3_UQ -w work_ST1_PR3_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST1_PR3_UNO -w work_ST1_PR3_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST2_PR1 -w work_ST2_PR1 $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST2_PR2_UQ -w work_ST2_PR2_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST2_PR2_UNO -w work_ST2_PR2_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST2_PR3_UQ -w work_ST2_PR3_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST2_PR3_UNO -w work_ST2_PR3_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST3_PR1 -w work_ST3_PR1 $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST3_PR2_UQ -w work_ST3_PR2_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST3_PR2_UNO -w work_ST3_PR2_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST3_PR3_UQ -w work_ST3_PR3_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST3_PR3_UNO -w work_ST3_PR3_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST4_PR1 -w work_ST4_PR1 $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST4_PR2_UQ -w work_ST4_PR2_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST4_PR2_UNO -w work_ST4_PR2_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST4_PR3_UQ -w work_ST4_PR3_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST4_PR3_UNO -w work_ST4_PR3_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST6_PR1 -w work_ST6_PR1 $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST6_PR2_UQ -w work_ST6_PR2_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST6_PR2_UNO -w work_ST6_PR2_UNO $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST6_PR3_UQ -w work_ST6_PR3_UQ $ww3 ww3_ts2" >> matrix.body
echo "$rtst -s ST6_PR3_UNO -w work_ST6_PR3_UNO $ww3 ww3_ts2" >> matrix.body
fi
# ww3_st3, no switch sharing here, but run only if you do not run MPI or OpenMP
if [ "$hur1mg" = 'y' ] && [ "$shrd" = 'y' ] && [ "$dist" != 'y' ] && [ "$omp" != 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s ST1_PR1 -w work_ST1_PR1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST1_PR2_UQ -w work_ST1_PR2_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST1_PR2_UNO -w work_ST1_PR2_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST1_PR3_UQ -w work_ST1_PR3_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST1_PR3_UNO -w work_ST1_PR3_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST2_PR1 -w work_ST2_PR1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST2_PR2_UQ -w work_ST2_PR2_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST2_PR2_UNO -w work_ST2_PR2_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST2_PR3_UQ -w work_ST2_PR3_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST2_PR3_UNO -w work_ST2_PR3_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST3_PR1 -w work_ST3_PR1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST3_PR2_UQ -w work_ST3_PR2_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST3_PR2_UNO -w work_ST3_PR2_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST3_PR3_UQ -w work_ST3_PR3_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST3_PR3_UNO -w work_ST3_PR3_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR1 -w work_ST4_PR1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR1_FLD1 -w work_ST4_FLD1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR1_FLD2 -w work_ST4_FLD2 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR2_UQ -w work_ST4_PR2_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR2_UNO -w work_ST4_PR2_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR3_UQ -w work_ST4_PR3_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR3_UNO -w work_ST4_PR3_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST6_PR1 -w work_ST6_PR1 $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST6_PR2_UQ -w work_ST6_PR2_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST6_PR2_UNO -w work_ST6_PR2_UNO $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST6_PR3_UQ -w work_ST6_PR3_UQ $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST6_PR3_UNO -w work_ST6_PR3_UNO $ww3 ww3_ts3" >> matrix.body
fi
# Moving grid cases for MPI, ww3_ts3 and mww3_test_05 share switches
if [ "$dist" = 'y' ]
then
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR1_MPI -w work_ST1_PR1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR1_MPI -w work_ST1_PR1_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_MPI -w work_ST1_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_MPI -w work_ST1_PR2_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_MPI -w work_ST1_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_MPI -w work_ST1_PR2_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_MPI -w work_ST1_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_MPI -w work_ST1_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_MPI -w work_ST1_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_MPI -w work_ST1_PR3_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR1_MPI -w work_ST2_PR1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR1_MPI -w work_ST2_PR1_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_MPI -w work_ST2_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_MPI -w work_ST2_PR2_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_MPI -w work_ST2_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_MPI -w work_ST2_PR2_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_MPI -w work_ST2_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_MPI -w work_ST2_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_MPI -w work_ST2_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_MPI -w work_ST2_PR3_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR1_MPI -w work_ST3_PR1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR1_MPI -w work_ST3_PR1_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_MPI -w work_ST3_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_MPI -w work_ST3_PR2_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_MPI -w work_ST3_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_MPI -w work_ST3_PR2_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_MPI -w work_ST3_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_MPI -w work_ST3_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_MPI -w work_ST3_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_MPI -w work_ST3_PR3_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR1_FLD1_MPI -w work_ST4_FLD1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR1_FLD2_MPI -w work_ST4_FLD2_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
echo "$rtst -s ST4_PR1_MPI -w work_ST4_PR1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR1_MPI -w work_ST4_PR1_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_MPI -w work_ST4_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_MPI -w work_ST4_PR2_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_MPI -w work_ST4_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_MPI -w work_ST4_PR2_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_MPI -w work_ST4_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_MPI -w work_ST4_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_MPI -w work_ST4_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_MPI -w work_ST4_PR3_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR1_MPI -w work_ST6_PR1_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR1_MPI -w work_ST6_PR1_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_MPI -w work_ST6_PR2_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_MPI -w work_ST6_PR2_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_MPI -w work_ST6_PR2_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_MPI -w work_ST6_PR2_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_MPI -w work_ST6_PR3_UQ_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_MPI -w work_ST6_PR3_UQ_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_MPI -w work_ST6_PR3_UNO_MPI -f -p $mpi -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_MPI -w work_ST6_PR3_UNO_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
fi
# Moving grid cases for MPI-OPENMP Hybrid, ww3_ts3 and mww3_test_05 share switches
if [ "$hybd" = 'y' ]
then
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR1_MPI_OMPH -w work_ST1_PR1_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR1_MPI_OMPH -w work_ST1_PR1_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_MPI_OMPH -w work_ST1_PR2_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_MPI_OMPH -w work_ST1_PR2_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_MPI_OMPH -w work_ST1_PR2_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_MPI_OMPH -w work_ST1_PR2_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_MPI_OMPH -w work_ST1_PR3_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_MPI_OMPH -w work_ST1_PR3_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_MPI_OMPH -w work_ST1_PR3_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_MPI_OMPH -w work_ST1_PR3_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR1_MPI_OMPH -w work_ST2_PR1_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR1_MPI_OMPH -w work_ST2_PR1_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_MPI_OMPH -w work_ST2_PR2_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_MPI_OMPH -w work_ST2_PR2_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_MPI_OMPH -w work_ST2_PR2_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_MPI_OMPH -w work_ST2_PR2_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_MPI_OMPH -w work_ST2_PR3_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_MPI_OMPH -w work_ST2_PR3_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_MPI_OMPH -w work_ST2_PR3_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_MPI_OMPH -w work_ST2_PR3_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR1_MPI_OMPH -w work_ST3_PR1_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR1_MPI_OMPH -w work_ST3_PR1_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_MPI_OMPH -w work_ST3_PR2_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_MPI_OMPH -w work_ST3_PR2_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_MPI_OMPH -w work_ST3_PR2_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_MPI_OMPH -w work_ST3_PR2_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_MPI_OMPH -w work_ST3_PR3_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_MPI_OMPH -w work_ST3_PR3_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_MPI_OMPH -w work_ST3_PR3_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_MPI_OMPH -w work_ST3_PR3_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR1_MPI_OMPH -w work_ST4_PR1_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR1_MPI_OMPH -w work_ST4_PR1_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_MPI_OMPH -w work_ST4_PR2_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_MPI_OMPH -w work_ST4_PR2_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_MPI_OMPH -w work_ST4_PR2_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_MPI_OMPH -w work_ST4_PR2_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_MPI_OMPH -w work_ST4_PR3_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_MPI_OMPH -w work_ST4_PR3_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_MPI_OMPH -w work_ST4_PR3_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_MPI_OMPH -w work_ST4_PR3_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR1_MPI_OMPH -w work_ST6_PR1_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR1_MPI_OMPH -w work_ST6_PR1_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_MPI_OMPH -w work_ST6_PR2_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_MPI_OMPH -w work_ST6_PR2_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_MPI_OMPH -w work_ST6_PR2_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_MPI_OMPH -w work_ST6_PR2_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_MPI_OMPH -w work_ST6_PR3_UQ_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_MPI_OMPH -w work_ST6_PR3_UQ_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_MPI_OMPH -w work_ST6_PR3_UNO_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_MPI_OMPH -w work_ST6_PR3_UNO_MPI_OMPH -m grdset_a -f -p $mpi -n $nr -t $nth $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
fi
# Moving grid cases for OpenMP, ww3_ts3 and mww3_test_05 share switches
if [ "$omp" = 'y' ]
then
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR1_OMP -w work_ST1_PR1_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR1_OMP -w work_ST1_PR1_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_OMP -w work_ST1_PR2_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UQ_OMP -w work_ST1_PR2_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_OMP -w work_ST1_PR2_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR2_UNO_OMP -w work_ST1_PR2_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_OMP -w work_ST1_PR3_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UQ_OMP -w work_ST1_PR3_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_OMP -w work_ST1_PR3_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST1_PR3_UNO_OMP -w work_ST1_PR3_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR1_OMP -w work_ST2_PR1_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR1_OMP -w work_ST2_PR1_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_OMP -w work_ST2_PR2_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UQ_OMP -w work_ST2_PR2_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_OMP -w work_ST2_PR2_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR2_UNO_OMP -w work_ST2_PR2_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_OMP -w work_ST2_PR3_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UQ_OMP -w work_ST2_PR3_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_OMP -w work_ST2_PR3_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST2_PR3_UNO_OMP -w work_ST2_PR3_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR1_OMP -w work_ST3_PR1_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR1_OMP -w work_ST3_PR1_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_OMP -w work_ST3_PR2_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UQ_OMP -w work_ST3_PR2_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_OMP -w work_ST3_PR2_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR2_UNO_OMP -w work_ST3_PR2_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_OMP -w work_ST3_PR3_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UQ_OMP -w work_ST3_PR3_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_OMP -w work_ST3_PR3_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST3_PR3_UNO_OMP -w work_ST3_PR3_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR1_OMP -w work_ST4_PR1_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR1_OMP -w work_ST4_PR1_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_OMP -w work_ST4_PR2_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UQ_OMP -w work_ST4_PR2_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_OMP -w work_ST4_PR2_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR2_UNO_OMP -w work_ST4_PR2_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_OMP -w work_ST4_PR3_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UQ_OMP -w work_ST4_PR3_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_OMP -w work_ST4_PR3_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST4_PR3_UNO_OMP -w work_ST4_PR3_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR1_OMP -w work_ST6_PR1_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR1_OMP -w work_ST6_PR1_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_OMP -w work_ST6_PR2_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UQ_OMP -w work_ST6_PR2_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_OMP -w work_ST6_PR2_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR2_UNO_OMP -w work_ST6_PR2_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_OMP -w work_ST6_PR3_UQ_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UQ_OMP -w work_ST6_PR3_UQ_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
if [ "$hur1mg" = 'y' ] || [ "$multi05" = 'y' ] ; then
echo ' ' >> matrix.body ; fi
if [ "$hur1mg" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_OMP -w work_ST6_PR3_UNO_OMP -f -O -n $np $ww3 ww3_ts3" >> matrix.body
fi
if [ "$multi05" = 'y' ]
then
echo "$rtst -s ST6_PR3_UNO_OMP -w work_ST6_PR3_UNO_OMP -m grdset_a -f -O -n $np $ww3 mww3_test_05" >> matrix.body
fi
# - - - - - - - - - - - -
fi
# Second harmonic test case
if [ "$infgrv" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst $ww3 -w work_IG1 ww3_tig1.1" >> matrix.body
fi
# SMC grid cases, MPI only if requested
if [ "$smcgr" = 'y' ] && [ "$shrd" = 'y' ] && [ "$dist" != 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst $ww3 -w work_SHRD_SMC ww3_tp2.10" >> matrix.body
echo "$rtst -w work_SHRD $ww3 ww3_tp2.16" >> matrix.body
fi
if [ "$smcgr" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_MPI -f -p $mpi -n $np $ww3 ww3_tp2.10" >> matrix.body
echo "$rtst -s MPI -w work_MPI -f -p $mpi -n $np $ww3 ww3_tp2.16" >> matrix.body
fi
if [ "$smcgr" = 'y' ] && [ "$hybd" = 'y' ]; then
echo "$rtst -s MPI_OMPH -w work_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_tp2.10" >> matrix.body
echo "$rtst -s MPI_OMPH -w work_MPI_OMPH -f -p $mpi -n $nr -t $nth $ww3 ww3_tp2.16" >> matrix.body
fi
if [ "$multi09" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_MPI -m grdset_a -f -p $mpi -n $np $ww3 mww3_test_09" >> matrix.body
fi
# Rotated pole grid cases, (ww3_tp2.11 MPI only if requested)
if [ "$rtd" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst $ww3 ww3_tr1" >> matrix.body
echo "$rtst -i input_std -w work_std $ww3 ww3_tr1" >> matrix.body
echo "$rtst -i input_bndin -w work_bndin $ww3 ww3_tr1" >> matrix.body
fi
if [ "$rtd" = 'y' ] && [ "$shrd" = 'y' ] && [ "$dist" != 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst $ww3 -w work_SHRD_RTD ww3_tp2.11" >> matrix.body
fi
if [ "$rtd" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_MPI -f -p $mpi -n $np $ww3 ww3_tp2.11" >> matrix.body
fi
# mud/ice cases
if [ "$mudice" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s BT8 -w work_BT8 $ww3 ww3_tbt1.1" >> matrix.body
echo "$rtst -s BT8 -w work_BT8 $ww3 ww3_tbt2.1" >> matrix.body
echo "$rtst -s BT9 -w work_BT9 $ww3 ww3_tbt1.1" >> matrix.body
echo "$rtst -s BT9 -w work_BT9 $ww3 ww3_tbt2.1" >> matrix.body
echo "$rtst -g 100m -w work_100m_IC1 -i input_IC1_156x3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 350m -w work_350m_IC1 -i input_IC1_156x3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_1000m_IC1 -i input_IC1_156x3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 2500m -w work_2500m_IC1 -i input_IC1_156x3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 5km -w work_5km_IC1 -i input_IC1 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 10km -w work_10km_IC1 -i input_IC1 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 20km -w work_20km_IC1 -i input_IC1 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC1 -i input_IC1 $ww3 ww3_tic2.1" >> matrix.body
echo "$rtst -w work_IC2IS2 $ww3 ww3_tic2.2" >> matrix.body
echo "$rtst -g 1000m -w work_1000m_IC2_nrl -i input_IC2_nrl $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC2_nondisp_SMPL -i input_IC2_nondisp $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m_nondisp -w work_1000m_nondisp_IC2_ifr -i input_IC2_ifr $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m_nondisp -w work_1000m_nondisp_IC2_nrl -i input_IC2_nrl $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 350m -w work_350m_IC3 -i input_IC3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_1000m_IC3 -i input_IC3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 2500m -w work_2500m_IC3 -i input_IC3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC3_nondisp -i input_IC3_nondisp $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g CGICE_CHENG -w work_IC3_CGICE_CHENG -i input_IC3NL $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC4_M1 -i input_IC4_M1 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC4_M2 -i input_IC4_M2 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC4_M3 -i input_IC4_M3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC4_M4 -i input_IC4_M4 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC4_M5 -i input_IC4_M5 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC4_M6 -i input_IC4_M6 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 206H -w work_IC4_M6H -i input_IC4_M6 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 206L -w work_IC4_M6L -i input_IC4_M6 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC4_M7 -i input_IC4_M7 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC5_M1 -i input_IC5_M1 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC5_M2 -i input_IC5_M2 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -g 1000m -w work_IC5_M3 -i input_IC5_M3 $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -w work_IC3_A0.5k -i input_IC3_A0.5k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_A1.0k -i input_IC3_A1.0k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_A2.5k -i input_IC3_A2.5k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_B0.5k -i input_IC3_B0.5k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_B1.0k -i input_IC3_B1.0k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_B2.5k -i input_IC3_B2.5k $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_CHENG -i input_IC3_CHENG $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_V1_h -i input_IC3_V1_h $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -w work_IC3_V1_G -i input_IC3_V1_G $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s PR1_REFRX -w work_IC3_0.5k_PR1 -i input_IC3_0.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR1_REFRX -w work_IC3_2.5k_PR1 -i input_IC3_2.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR1_REFRX -w work_IC3_CHENG -i input_IC3_CHENG $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UQ_REFRX -w work_IC3_0.5k_PR2_UQ -i input_IC3_0.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UQ_REFRX -w work_IC3_2.5k_PR2_UQ -i input_IC3_2.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UQ_REFRX -w work_IC3_V1_h -i input_IC3_V1_h $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UNO_REFRX -w work_IC3_0.5k_PR2_UNO -i input_IC3_0.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UNO_REFRX -w work_IC3_2.5k_PR2_UNO -i input_IC3_2.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR2_UNO_REFRX -w work_IC3_V1_G -i input_IC3_V1_G $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR3_UQ_REFRX -w work_IC3_0.5k_PR3_UQ -i input_IC3_0.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR3_UQ_REFRX -w work_IC3_2.5k_PR3_UQ -i input_IC3_2.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR3_UNO_REFRX -w work_IC3_0.5k_PR3_UNO -i input_IC3_0.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s PR3_UNO_REFRX -w work_IC3_2.5k_PR3_UNO -i input_IC3_2.5k $ww3 ww3_tic1.3" >> matrix.body
echo "$rtst -s IC0IS2 -w work_IC0IS2_1000 -g 1000m $ww3 ww3_tic1.4" >> matrix.body
echo "$rtst -s IC1IS2 -w work_IC1IS2_1000 -g 1000m $ww3 ww3_tic1.4" >> matrix.body
echo "$rtst -s IC2IS2 -w work_IC2IS2_IC2b -g IC2b_1000m $ww3 ww3_tic1.4" >> matrix.body
echo "$rtst -s IC2IS2 -w work_IC2IS2_IC2d -g IC2d_1000m $ww3 ww3_tic1.4" >> matrix.body
echo "$rtst -s IC2IS2 -w work_IC2IS2scat -g scat $ww3 ww3_tic2.3" >> matrix.body
echo "$rtst -s IC2IS2 -w work_IC2IS2creep -g creepOnly $ww3 ww3_tic2.3" >> matrix.body
echo "$rtst -s IC2IS2 -w work_IC2IS2dissip -g dissipOnly $ww3 ww3_tic2.3" >> matrix.body
fi
if [ "$mudice" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s BT8_MPI -w work_BT8_MPI -f -p $mpi -n $np $ww3 ww3_tbt1.1" >> matrix.body
echo "$rtst -s BT8_MPI -w work_BT8_MPI -f -p $mpi -n $np $ww3 ww3_tbt2.1" >> matrix.body
echo "$rtst -s BT9_MPI -w work_BT9_MPI -f -p $mpi -n $np $ww3 ww3_tbt1.1" >> matrix.body
echo "$rtst -s BT9_MPI -w work_BT9_MPI -f -p $mpi -n $np $ww3 ww3_tbt2.1" >> matrix.body
echo "$rtst -s MPI -g CGICE_CHENG -w work_IC3_CGICE_CHENG_MPI -i input_IC3NL -f -p $mpi -n $np $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -s MPI -g CGOW_CHENG -w work_IC3_CGOW_CHENG_MPI -i input_IC3NL -f -p $mpi -n $np $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -s MPI -g CGOW_NOCHENG -w work_IC3_CGOW_NOCHENG_MPI -i input_IC3NL -f -p $mpi -n $np $ww3 ww3_tic1.1" >> matrix.body
echo "$rtst -s MPI -w work_IC3_A0.5k_MPI -i input_IC3_A0.5k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s MPI -w work_IC3_A1.0k_MPI -i input_IC3_A1.0k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s MPI -w work_IC3_A2.5k_MPI -i input_IC3_A2.5k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s MPI -w work_IC3_B0.5k_MPI -i input_IC3_B0.5k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s MPI -w work_IC3_B1.0k_MPI -i input_IC3_B1.0k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
echo "$rtst -s MPI -w work_IC3_B2.5k_MPI -i input_IC3_B2.5k -f -p $mpi -n $np $ww3 ww3_tic1.2" >> matrix.body
fi
# unstructured grid with PDLIB for domain decomposition and implicit solver
if [ "$pdlib" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -s NO_PDLIB -w work_a -g a -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "$rtst -s MPI -s NO_PDLIB -w work_ma -m grdset_a -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_b -g b -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_c -g c -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_pdlib -g pdlib -f -p $mpi -n $np $ww3 ww3_tp2.6" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_mb -m grdset_b -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_mc -m grdset_c -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_tp2.17/work_ma1" >> matrix.body
echo "cp ww3_tp2.17/work_ma/restart001.inla ww3_tp2.17/work_ma1/restart.inla" >> matrix.body
echo "$rtst -s MPI -s NO_PDLIB -w work_ma1 -m grdset_a1 -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "./bin/test.comp ww3_tp2.17 work_ma work_ma1" >> matrix.body
echo "mkdir -p ww3_tp2.17/work_mc1" >> matrix.body
echo "cp ww3_tp2.17/work_mc/restart001.inlc ww3_tp2.17/work_mc1/restart.inlc" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_mc1 -m grdset_c1 -f -p $mpi -n $np $ww3 ww3_tp2.17" >> matrix.body
echo "./bin/test.comp ww3_tp2.17 work_mc work_mc1" >> matrix.body
fi
fi
# unstructured grid with PDLIB for domain decomposition and implicit solver, Neumann Bnd, depth breaking & triad interaction ST
if [ "$pdlib" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_1A_a -f -g a -p $mpi -n $np -o netcdf -i input_Case1A $ww3 ww3_tp2.19" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_1B_a -f -g a -p $mpi -n $np -o netcdf -i input_Case1B $ww3 ww3_tp2.19" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_1C_a -f -g a -p $mpi -n $np -o netcdf -i input_Case1C $ww3 ww3_tp2.19" >> matrix.body
fi
#Unresolved Obstacles Source Term (UOST)
if [ "$uost" = 'y' ]
then
echo ' ' >> matrix.body
if [ "$dist" = 'y' ]
then
echo "$rtst -s MPI -w work_rg_shel_MPI -i input_rg_shel -f -p $mpi -n $np $ww3 ww3_ts4" >> matrix.body
echo "$rtst -s MPI -w work_rg_multi_MPI -i input_rg_multi -m grdset -f -p $mpi -n $np $ww3 ww3_ts4" >> matrix.body
echo "$rtst -s MPI -w work_ug_MPI -i input_ug -f -p $mpi -n $np $ww3 ww3_ts4" >> matrix.body
else
echo "$rtst -w work_rg_shel -i input_rg_shel $ww3 ww3_ts4" >> matrix.body
echo "$rtst -w work_rg_multi -i input_rg_multi -m grdset $ww3 ww3_ts4" >> matrix.body
echo "$rtst -w work_ug -i input_ug $ww3 ww3_ts4" >> matrix.body
fi
fi
# Global unstructured grid and Unresolved Obstacles Source Term (UOST)
if [ "$uost" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -s NO_PDLIB -w work_a -g a -f -p $mpi -n $np $ww3 ww3_tp2.21" >> matrix.body
echo "$rtst -s MPI -s NO_PDLIB -w work_ma -m grdset_a -f -p $mpi -n $np $ww3 ww3_tp2.21" >> matrix.body
if [ "$pdlib" = 'y' ]
then
echo "$rtst -s MPI -s PDLIB -w work_b -g b -f -p $mpi -n $np $ww3 ww3_tp2.21" >> matrix.body
echo "$rtst -s MPI -s PDLIB_METIS -w work_b_metis -g b -f -p $mpi -n $np $ww3 ww3_tp2.21" >> matrix.body
echo "$rtst -s MPI -s PDLIB -w work_mb -m grdset_b -f -p $mpi -n $np $ww3 ww3_tp2.21" >> matrix.body
fi
fi
#Test of updating the restart spectra
if [ "$assim" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s ST4 -w work_UPD0F_O -i input_UPD0F_O $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD0F_U -i input_UPD0F_U $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD2_O -i input_UPD2_O $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD2_U -i input_UPD2_U $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD2_U_cap -i input_UPD2_U_cap $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD3_O -i input_UPD3_O $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD3_U -i input_UPD3_U $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD3_U_cap -i input_UPD3_U_cap $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD5_O -i input_UPD5_O $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD5_U -i input_UPD5_U $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD5_U_cap -i input_UPD5_U_cap $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD6_O -i input_UPD6_O $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD6_U -i input_UPD6_U $ww3 ww3_ta1" >> matrix.body
echo "$rtst -s ST4 -w work_UPD6_U_cap -i input_UPD6_U_cap $ww3 ww3_ta1" >> matrix.body
fi
#Test of atmosphere, ocean, and ice coupling using OASIS
if [ "$oasis" = 'y' ] && [ "$dist" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s OASACM -i input_oasacm -w work_OASACM -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
echo "$rtst -s OASACM2 -i input_oasacm2 -w work_OASACM2 -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
halfnp=$(($np / 2))
echo "$rtst -s OASACM3 -i input_oasacm3 -w work_OASACM3 -f -p $mpi -n $halfnp $ww3 ww3_tp2.14" >> matrix.body
echo "mkdir -p ww3_tp2.14/work_OASACM4" >> matrix.body
echo "ln -sf ../work_OASACM3/restart001.ww3 ww3_tp2.14/work_OASACM4/restart.ww3" >> matrix.body
echo "$rtst -s OASACM4 -i input_oasacm4 -w work_OASACM4 -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
echo "mkdir -p ww3_tp2.14/work_OASACM5" >> matrix.body
echo "ln -sf ../work_OASACM4/restart001.ww3 ww3_tp2.14/work_OASACM5/restart.ww3" >> matrix.body
echo "$rtst -s OASACM5 -i input_oasacm5 -w work_OASACM5 -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
echo "$rtst -s OASACM6 -i input_oasacm6 -w work_OASACM6 -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
echo "$rtst -s OASOCM -i input_oasocm -w work_OASOCM -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
echo "$rtst -s OASICM -i input_oasicm -w work_OASICM -C OASIS -f -p $mpi -n $np $ww3 ww3_tp2.14" >> matrix.body
fi
#Test of UFS applications with ww3_multi and grib2 output
if [ "$ufs" = 'y' ] && [ "$grib" = 'y' ]
then
# (light grid for single core/laptop check)
if [ "$ufscoarse" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_c -m grdset_c -f -p $mpi -n $np $ww3 ww3_ufs1.1" >> matrix.body
if [ "$npl_b4b" = 'y' ]
then
halfnp=$(($np / 2))
echo "$rtst -s MPI -w work_c_npl -m grdset_c -f -p $mpi -n $halfnp $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_c work_c_npl" >> matrix.body
fi
if [ "$nth_b4b" = 'y' ]
then
echo "$rtst -s MPI_OMPH -w work_c_nth -m grdset_c -f -p $mpi -n $nr -t $nth $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_c work_c_nth" >> matrix.body
fi
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_ufs1.1/work_d" >> matrix.body
echo "cp ww3_ufs1.1/work_c/20210401.030000.restart.glo_5deg ww3_ufs1.1/work_d/restart.glo_5deg" >> matrix.body
echo "$rtst -s MPI -w work_d -m grdset_d -f -p $mpi -n $np $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_c work_d" >> matrix.body
fi
else
echo ' ' >> matrix.body
echo "$rtst -s MPI_OMPH -w work_a -m grdset_a -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.1" >> matrix.body
if [ "$npl_b4b" = 'y' ]
then
echo "$rtst -s MPI_OMPH -w work_a_npl -m grdset_a -f -p $mpi -n $npl1 -t $nth1 $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_a work_a_npl" >> matrix.body
fi
if [ "$nth_b4b" = 'y' ]
then
echo "$rtst -s MPI_OMPH -w work_a_nth -m grdset_a -f -p $mpi -n $npl -t $nth $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_a work_a_nth" >> matrix.body
fi
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_ufs1.1/work_b" >> matrix.body
echo "cp ww3_ufs1.1/work_a/20210401.030000.restart.glo_1deg ww3_ufs1.1/work_b/restart.glo_1deg" >> matrix.body
echo "$rtst -s MPI_OMPH -w work_b -m grdset_b -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_a work_b" >> matrix.body
fi
fi
# Global unstr case
# Domain Decomposition Explicit
fi
echo "$rtst -s MPI -s PDLIB -i input_unstr -w work_unstr_a -g a -f -p $mpi -n $np $ww3 ww3_ufs1.1" >> matrix.body
# Domain Decomposition Block Explicit
echo "$rtst -s MPI -s PDLIB -i input_unstr -w work_unstr_b -g b -f -p $mpi -n $np $ww3 ww3_ufs1.1" >> matrix.body
# Domain Decomposition Implicit
echo "$rtst -s MPI -s PDLIB -i input_unstr -w work_unstr_c -g c -f -p $mpi -n $np $ww3 ww3_ufs1.1" >> matrix.body
#Test of UFS applications with ww3_multi_esmf and grib2 output
if [ "$ufs" = 'y' ] && [ "$esmf" = 'y' ] && [ "$grib" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI -w work_a_esmf -m grdset_a -C ESMF -f -p $mpi -n $npl $ww3 ww3_ufs1.1" >> matrix.body
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_ufs1.1/work_b_esmf" >> matrix.body
echo "cp ww3_ufs1.1/work_a_esmf/20210401.030000.restart.glo_1deg ww3_ufs1.1/work_b_esmf/restart.glo_1deg" >> matrix.body
echo "$rtst -s MPI -w work_b_esmf -m grdset_b -C ESMF -f -p $mpi -n $npl $ww3 ww3_ufs1.1" >> matrix.body
echo "./bin/test.comp ww3_ufs1.1 work_a_esmf work_b_esmf" >> matrix.body
fi
fi
#GFSv16 setup with ww3_multi and grib2 output
if [ "$ufs" = 'y' ] && [ "$grib" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI_OMPH -w work_a -m grdset_a -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_ufs1.2/work_b" >> matrix.body
echo "cp ww3_ufs1.2/work_a/20210401.030000.restart.gnh_10m ww3_ufs1.2/work_b/restart.gnh_10m" >> matrix.body
echo "cp ww3_ufs1.2/work_a/20210401.030000.restart.gsh_15m ww3_ufs1.2/work_b/restart.gsh_15m" >> matrix.body
echo "cp ww3_ufs1.2/work_a/20210401.030000.restart.aoc_9km ww3_ufs1.2/work_b/restart.aoc_9km" >> matrix.body
echo "$rtst -s MPI_OMPH -w work_b -m grdset_b -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
echo "./bin/test.comp ww3_ufs1.2 work_a work_b" >> matrix.body
fi
fi
#GFSv16 setup with ww3_multi_esmf and grib2 output
if [ "$ufs" = 'y' ] && [ "$esmf" = 'y' ] && [ "$grib" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI_OMPH -w work_a_esmf -m grdset_a -C ESMF -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
if [ "$rstrt_b4b" = 'y' ]
then
echo "mkdir -p ww3_ufs1.2/work_b_esmf" >> matrix.body
echo "cp ww3_ufs1.2/work_a_esmf/20210401.030000.restart.gnh_10m ww3_ufs1.2/work_b_esmf/restart.gnh_10m" >> matrix.body
echo "cp ww3_ufs1.2/work_a_esmf/20210401.030000.restart.gsh_15m ww3_ufs1.2/work_b_esmf/restart.gsh_15m" >> matrix.body
echo "cp ww3_ufs1.2/work_a_esmf/20210401.030000.restart.aoc_9km ww3_ufs1.2/work_b_esmf/restart.aoc_9km" >> matrix.body
echo "$rtst -s MPI_OMPH -w work_b_esmf -m grdset_b -C ESMF -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
echo "./bin/test.comp ww3_ufs1.2 work_a_esmf work_b_esmf" >> matrix.body
fi
fi
#Test gint for restarts
if [ "$ufs" = 'y' ] && [ "$grib" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI_OMPH -w work_c -m grdset_c -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
echo "mkdir -p ww3_ufs1.2/work_l" >> matrix.body
echo "cp ww3_ufs1.2/work_c/restart.hafsl ww3_ufs1.2/work_l/restart.hafsl" >> matrix.body
echo "$rtst -s MPI_OMPH -w work_l -m grdset_l -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.2" >> matrix.body
fi
#GEFSv12 setup with ww3_multi and grib2 output
if [ "$ufs" = 'y' ] && [ "$grib" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -s MPI_OMPH -w work_a -m grdset_a -f -p $mpi -n $npl -t $nth1 $ww3 ww3_ufs1.3" >> matrix.body
fi
# 365_day and 360_day calendars, no switch sharing here
if [ "$calendar" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -g STD -w work_STD $ww3 ww3_tc1" >> matrix.body
echo "$rtst -g C360 -w work_C360 $ww3 ww3_tc1" >> matrix.body
echo "$rtst -g C365 -w work_C365 $ww3 ww3_tc1" >> matrix.body
fi
# Configurable netCDF metadata in ww3_ounf
if [ "$confignc" = 'y' ] && [ "$shrd" = 'y' ]
then
echo ' ' >> matrix.body
echo "$rtst -N $ww3 ww3_tnc1" >> matrix.body
fi
# --------------------------------------------------------------------------- #
# 3. End of script output #
# --------------------------------------------------------------------------- #
echo " echo ' '" > matrix.tail
echo " echo ' *****************************************************'" >> matrix.tail
echo " echo ' *** end of WAVEWATCH III matrix of regression tests ***'" >> matrix.tail
echo " echo ' *****************************************************'" >> matrix.tail
echo " echo ' '" >> matrix.tail
# --------------------------------------------------------------------------- #
# 4. Put it together and clean up #
# --------------------------------------------------------------------------- #
mv matrix.head matrix
if [ -z "$filter" ]
then
cat matrix.body >> matrix
rm -f matrix.body
else
for filt in $filter
do
mv matrix.body matrix.head
grep $filt matrix.head > matrix.body
rm -f matrix.head
done
cat matrix.body >> matrix
rm -f matrix.body
fi
cat matrix.tail >> matrix
rm -f matrix.tail
echo "file matrix prepared ...."
# --------------------------------------------------------------------------- #
# End to matrix.base #
# --------------------------------------------------------------------------- #