$ -------------------------------------------------------------------- $
$ WAVEWATCH III shell input file                                       $
$ -------------------------------------------------------------------- $
$ Define input to be used with flag for use and flag for definition
$ as a homogeneous field (first three only); seven input lines.
$
   T F     Water levels
   T F     Currents
   T F     Winds
   F       Ice concentrations
   F       Assimilation data : Mean parameters
   F       Assimilation data : 1-D spectra
   F       Assimilation data : 2-D spectra.
$
$ Time frame of calculations ----------------------------------------- $
$ - Starting time in yyyymmdd hhmmss format.
$ - Ending time in yyyymmdd hhmmss format.
$
   20151214 000000
   20151214 040000
$
$ Define output data ------------------------------------------------- $
$
$ Define output server mode. This is used only in the parallel version
$ of the model. To keep the input file consistent, it is always needed.
$ IOSTYP = 1 is generally recommended. IOSTYP > 2 may be more efficient
$ for massively parallel computations. Only IOSTYP = 0 requires a true
$ parallel file system like GPFS.
$
$    IOSTYP = 0 : No data server processes, direct access output from
$                 each process (requirese true parallel file system).
$             1 : No data server process. All output for each type 
$                 performed by process that performes computations too.
$             2 : Last process is reserved for all output, and does no
$                 computing.
$             3 : Multiple dedicated output processes.
$
   3
$
$ Five output types are available (see below). All output types share
$ a similar format for the first input line:
$ - first time in yyyymmdd hhmmss format, output interval (s), and 
$   last time in yyyymmdd hhmmss format (all integers).
$ Output is disabled by setting the output interval to 0.
$
$ Type 1 : Fields of mean wave parameters
$          Standard line and line with flags to activate output fields
$          as defined in section 2.4 of the manual. The second line is
$          not supplied if no output is requested.
$                               The raw data file is out_grd.ww3, 
$                               see w3iogo.ftn for additional doc.
$          
$          
$
   20151214 000000 3600 20151214 040000
  N
  WND HS
$
$
$ Type 2 : Point output
$          Standard line and a number of lines identifying the 
$          longitude, latitude and name (C*10) of output points.
$          The list is closed by defining a point with the name
$          'STOPSTRING'. No point info read if no point output is
$          requested (i.e., no 'STOPSTRING' needed).
$          Example for spherical grid.
$                               The raw data file is out_pnt.ww3, 
$                               see w3iogo.ftn for additional doc.
$
$   NOTE : Spaces may be included in the name, but this is not
$          advised, because it will break the GrADS utility to 
$          plots spectra and source terms, and will make it more
$          difficult to use point names in data files.
$
   20151214 000000 3600  20151214 040000
$                                          
$output points for Inlet 
$
-72.100 39.672  a01
-72.115 39.719  a02
-72.130 39.766  a03
-72.145 39.812  a04
-72.160 39.859  a05
-72.175 39.906  a06
-72.190 39.952  a07
-72.205 39.999  a08
-72.220 40.046  a09
-72.235 40.092  a10
-72.250 40.139  a11
-72.265 40.186  a12
-72.280 40.232  a13
-72.295 40.279  a14
-72.310 40.326  a15
-72.325 40.372  a16
-72.340 40.419  a17
-72.355 40.465  a18
-72.370 40.512  a19
-72.385 40.559  a20
-72.400 40.605  a21
-72.415 40.652  a22
-72.430 40.699  a23
-72.445 40.745  a24
-72.460 40.792  a25
-72.475 40.839  a26
-72.490 40.885  a27
-72.505 40.932  a28
-72.520 40.979  a29
-72.535 41.025  a30
-72.550 41.072  a31
-72.565 41.119  a32
-72.580 41.165  a33
-72.595 41.212  a34
-72.610 41.259  a35
-72.625 41.305  a36
-72.640 41.352  a37
-72.655 41.398  a38
-72.670 41.445  a39
-72.685 41.492  a40
-72.700 41.538  a41
$
   0.0   0.0  'STOPSTRING'
$
$ Type 3 : Output along  track.
$          Flag for formatted input file.
$                         The data files are track_i.ww3 and
$                         track_o.ww3, see w3iotr.ftn for ad. doc.
$
   20060101 000000   0  20040101 000000
$
$ Type 4 : Restart files (no additional data required).
$                               The data file is restartN.ww3, see
$                               w3iors.ftn for additional doc.
$
   20151214 000000 3600  20151215 000000
$
$ Type 5 : Boundary data (no additional data required).
$                               The data file is nestN.ww3, see
$                               w3iobp.ftn for additional doc.
$
   20040601 000000    0  20040103 000000
$
$ Type 6 : Separated wave field data (dummy for now).
$          First, last step IX and IY, flag for formatted file
$
   20060101 000000    0  20040603 000000
$   
$ Testing of output through parameter list (C/TPAR) ------------------ $
$    Time for output and field flags as in above output type 1.
$
$  19680606 014500
$    T T T T T  T T T T T  T T T T T  T
$
$ Homogeneous field data --------------------------------------------- $
$ Homogeneous fields can be defined by a list of lines containing an ID
$ string 'LEV' 'CUR' 'WND', date and time information (yyyymmdd
$ hhmmss), value (S.I. units), direction (current and wind, oceanographic
$ convention degrees)) and air-sea temparature difference (degrees C).
$ 'STP' is mandatory stop string.
$
$   'WND' 20080101 000000  20.    315.    0.0
$
  'the_end'  0
$
   'STP'
$
$ -------------------------------------------------------------------- $
$ End of input file                                                    $
$ -------------------------------------------------------------------- $