#!/bin/bash
# --------------------------------------------------------------------------- #
# matrix.go: Run matrix of regression tests on target machine. #
# #
# Remarks: #
# - This version is set up for automatic w3_setenv script and for the #
# IFREMER HPC 'datarmor'. When using this for your own setup and #
# computer, please copy rather than modify. #
# #
# Hendrik L. Tolman #
# August 2013 #
# December 2013 #
# April 2018 #
# #
# Copyright 2013 National Weather Service (NWS), #
# National Oceanic and Atmospheric Administration. All rights #
# reserved. WAVEWATCH III is a trademark of the NWS. #
# No unauthorized use without permission. #
# #
# --------------------------------------------------------------------------- #
# 0. Environment file
source $(dirname $0)/../../model/bin/w3_setenv
main_dir=$WWATCH3_DIR
temp_dir=$WWATCH3_TMP
source=$WWATCH3_SOURCE
list=$WWATCH3_LIST
echo "Main directory : $main_dir"
echo "Scratch directory : $temp_dir"
echo "Save source codes : $source"
echo "Save listings : $list"
# 1. Set up
# 1.a Computer/ user dependent set up
echo '#!/bin/bash' > matrix.head
echo ' ' >> matrix.head
echo '#PBS -q mpi_2' >> matrix.head
echo '#PBS -l mem=20G' >> matrix.head
echo '#PBS -l walltime=48:00:00' >> matrix.head
echo '#PBS -N ww3_regtest' >> matrix.head
echo '#PBS -j oe' >> matrix.head
echo '#PBS -o matrix.out' >> matrix.head
echo ' ' >> matrix.head
echo " cd $(dirname $main_dir)/regtests" >> matrix.head
echo ' ' >> matrix.head
# Netcdf modules
cmplr=datarmor_mpt_debug
echo ' source /usr/share/Modules/3.2.10/init/bash' >> matrix.head
echo ' module purge' >> matrix.head
echo ' export WWATCH3_NETCDF=NC4' >> matrix.head
echo " export WW3_PARCOMPN=4" >> matrix.head
if [ $cmplr = "datarmor_intel_debug" ]
then
echo ' module load intel-comp/18' >> matrix.head
echo ' module load impi/2018.1.163' >> matrix.head
echo ' export PATH=/home/datawork-wave/NETCDF-FINAL/INTEL/bin::${PATH}' >> matrix.head
echo ' export NETCDF_CONFIG=/home/datawork-wave/NETCDF-FINAL/INTEL/bin/nf-config'>> matrix.head
echo ' export METIS_PATH=/home/datawork-wave/PARMETIS/INTEL' >> matrix.head
elif [ $cmplr = "datarmor_mpt_debug" ]
then
echo ' module load intel-comp/18' >> matrix.head
echo ' module load mpt/2.15' >> matrix.head
echo ' export PATH=/home/datawork-wave/NETCDF-FINAL/MPT/bin::${PATH}' >> matrix.head
echo ' export NETCDF_CONFIG=/home/datawork-wave/NETCDF-FINAL/MPT/bin/nf-config' >> matrix.head
echo ' export METIS_PATH=/home/datawork-wave/PARMETIS/MPT' >> matrix.head
elif [ $cmplr = "datarmor_gnu_debug" ]
then
echo ' module load impi/2018.1.163' >> matrix.head
echo ' export PATH=/home/datawork-wave/NETCDF-FINAL/GNU/bin::${PATH}' >> matrix.head
echo ' export NETCDF_CONFIG=/home/datawork-wave/NETCDF-FINAL/GNU/bin/nf-config' >> matrix.head
echo ' export METIS_PATH=/home/datawork-wave/PARMETIS/GNU' >> matrix.head
elif [ $cmplr = "datarmor_pgi_debug" ]
then
echo ' module load pgi/17.10' >> matrix.head
echo ' module load mpt/2.17' >> matrix.head
echo ' export PATH=/home/datawork-wave/NETCDF-FINAL/PGI/bin::${PATH}' >> matrix.head
echo ' export NETCDF_CONFIG=/home/datawork-wave/NETCDF-FINAL/PGI/bin/nf-config' >> matrix.head
echo ' export METIS_PATH=/home/datawork-wave/PARMETIS/PGI' >> matrix.head
fi
echo ' '
# Compiler option. Choose appropriate compiler and set cmplOption to
# y if using for the first time or using a different compiler
export cmplOption='y'
export mpi='$MPI_LAUNCH'
export np='56'
export nr='28'
export nth='2'
if [ "$cmplOption" = 'y' ]
then
export rtst="./bin/run_test -o both -N -f -S -T -c $cmplr"
else
export rtst="./bin/run_test -o both -N -f -S -T"
fi
export ww3='../model'
# 1.b Flags to do course selection - - - - - - - - - - - - - - - - - - - - - -
# Addition selection by commenting out lines as below
export shrd='y' # Do shared architecture tests
export dist='y' # Do distributed architecture (MPI) tests
export omp='y' # Threaded (OpenMP) tests
export hybd='n' # Hybrid options
export prop1D='y' # 1-D propagation tests (ww3_tp1.X)
export prop2D='y' # 2-D propagation tests (ww3_tp2.X)
export time='y' # time linmited growth
export fetch='y' # fetch linmited growth
export hur1mg='y' # Hurricane with one moving grid
export shwtr='y' # shallow water tests
export unstr='y' # unstructured grid tests
export pdlib='y' # unstr with pdlib for domain decomposition and implicit solver
export smcgr='y' # SMC/Rotated grid test
export mudice='y' # Mud/Ice and wave interaction tests
export infgrv='y' # Second harmonic generation tests
export uost='y' # ww3_ts4 Unresolved Obstacles Source Term (UOST)
export assim='y' # Restart spectra update
export multi01='y' # mww3_test_01 (wetting and drying)
export multi02='y' # mww3_test_02 (basic two-way nesting test))
export multi03='y' # mww3_test_03 (three high and three low res grids).
export multi04='y' # mww3_test_04 (swell on sea mount and/or current)
export multi05='y' # mww3_test_05 (three-grid moving hurricane)
export multi06='y' # mww3_test_06 (curvilinear grid tests)
export multi07='y' # mww3_test_07 (unstructured grid tests)
export multi08='y' # mww3_test_08 (wind and ice tests)
# export filter='PR3 ST2 UQ'
# The filter does a set of consecutinve greps on the
# command lines generated by filter.base with the above
# selected options.
# --------------------------------------------------------------------------- #
# 2. Execute matrix.base ... #
# --------------------------------------------------------------------------- #
$main_dir/../regtests/bin/matrix.base
# --------------------------------------------------------------------------- #
# End to the matrix #
# --------------------------------------------------------------------------- #