Cards for GDAS Version of PREPSSMI -- Version 12 September 2004 Last update 12Z 02 March 1998: Switch from F-10 to F-14 satellite Last update 12Z 16 March 2000: Removed switch ICAT, added switch IMIN; F-15 replaces F-14 Last update 12Z 13 June 2000: Added optional "IVAR" switches to replace first set of switches when "PREPSSMI_PROD_TYPE" = 'COMBINATION' and PREPOBS_PREPSSMI is run twice (see ""Special Case for "PREPSSMI_PROD_TYPE" = 'COMBINATION'"" below) Last update 12Z 25 Jan 2005: Expanded size of IVAR array from 9 to 10 to account for sea surface temperature product Last update 12Z 14 Aug 2006: Turn off processing of data from DMSP F-15 satellite (data are bad) Note: "IVAR" below must be on a line all to itself, and it must not be split across 2 lines (this is because the script may replace it with one of the IVAR lines at the bottom of this file). &SWTCH IVAR = 0, 0,9999,9999,9999,9999,9999,9999,9999,9999, IQM = 0, QMPW =FALSE, IALG = 0, DELAT = 1.0, DELON = 1.0, ISUPOB = 1, IYEAR = 0000, IMONTH = 00, IDAY = 00, IHOUR = 00, IMIN = 00, IWINDO = 300, LATS = -90, LATN = 90, LONW = 360, LONE = 0, LIMCNT = 6, LSAT = 2*FALSE, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, FALSE, FALSE / LSAT--- F-09 F-10 F-11 F-12 F-13 F-14 F-15 F-16 Special Case for "PREPSSMI_PROD_TYPE" = 'COMBINATION' ... One of the following sets of "IVAR" switches below will replace the set above when the variable "PREPSSMI_PROD_TYPE" = 'COMBINATION' in the script - this means PREPOBS_PREPSSMI will run twice: once reading in the operational FNOC products and using the IVAR switches from "ssmip" below, and then again reading in the NN3 products and using the IVAR switches from "ssmipn" below. The output reprocessed BUFR files from the two runs are then combined into a single file. (Note: Do not change anything below except "9999" to "0" or vice versa - the column positions must not be changed.) ssmip: IVAR = 9999,9999, 0,9999,9999,9999,9999,9999,9999,9999, ssmipn: IVAR = 0, 0,9999,9999,9999,9999,9999,9999,9999,9999,