UARDC - Report diagnostic code

40-59: Reason for no report or incomplete report
40	Report not filed
42	Ground equipment failure
43	Observation delayed
44	Power failure
45	Unfavorable weather conditions
46	Low maximum altitude (less than 500m above ground)
47	Leaking balloon
48	Ascent not authorized for this period
49	Alert
50	Ascent did not extend above the 400hPa level
51	Balloon forced down by icing conditions
52	Balloon forced down by precipitation
53	Atmospheric interference
54	Local interference
55	Fading signal
56	Weak signal
57	Preventive maintenance
58	Flight equipment failure (transmitter, balloon, attachments, etc.)
59	Any reason not listed above

75-89: Corrected data
80	Corrected report for the entire report (first plus second transmissions)
81	Corrected report for the entire first transmission
82	Corrected report for the entire second transmission

110-129: Code violation error in report
110	Id wind level flag has illegal value
111	Temp mandatory level indicator not in expected location
112	Temp significant level indicator not in expected location
113	Pilot mandatory level pressure group not in expected location
114	Pilot significant level height group not in expected location
115	Group has invalid length
116	Recovery attempts were halted (too many errors)
117	Pilot significant level height is above 100mb in part BB
118	Pilot significant level height is below 100mb in part DD
119	Too many temp mandatory level heights encoded as "000"
120	Id wind level flag is miscoded