This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by src/grib_api.h configure , which was generated by GNU Autoconf 2.65. Invocation command line was $ configure --prefix=/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16 ## --------- ## ## Platform. ## ## --------- ## hostname = g14a2 uname -m = x86_64 uname -r = 2.6.32-220.el6.x86_64 uname -s = Linux uname -v = #1 SMP Wed Nov 9 08:03:13 EST 2011 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usrx/local/hpss PATH: /usrx/local/intel/icsxe/2012.0.032/bin PATH: /usrx/local/intel/vtune_amplifier_xe_2011/bin64 PATH: /usrx/local/intel/inspector_xe_2011/bin64 PATH: /usrx/local/intel/itac/8.0.3.007/bin PATH: /usrx/local/intel/impi/4.0.3.008/intel64/bin PATH: /usrx/local/intel/composer_xe_2011_sp1.11.339/bin/intel64 PATH: /usrx/local/lsf/8.3/linux2.6-glibc2.3-x86_64/etc PATH: /usrx/local/lsf/8.3/linux2.6-glibc2.3-x86_64/bin PATH: /usr/lib64/qt-3.3/bin PATH: /usr/local/bin PATH: /bin PATH: /usr/bin PATH: /usr/local/sbin PATH: /usr/sbin PATH: /sbin PATH: /opt/ibutils/bin PATH: /usrx/local/intel/composer_xe_2011_sp1.11.339/mpirt/bin/intel64 PATH: /u/Jianbin.Yang/bin PATH: /com/pmb/Jianbin.Yang/bin PATH: /com/pmb/Jianbin.Yang/WCOSS/bin PATH: . ## ----------- ## ## Core tests. ## ## ----------- ## configure:2422: checking whether build environment is sane configure:2472: result: yes configure:2494: checking for a BSD-compatible install configure:2562: result: /usr/bin/install -c configure:2712: checking for a thread-safe mkdir -p configure:2751: result: /bin/mkdir -p configure:2764: checking for gawk configure:2780: found /bin/gawk configure:2791: result: gawk configure:2802: checking whether make sets $(MAKE) configure:2824: result: yes configure:2992: checking for xlc_r configure:3022: result: no configure:2992: checking for xlc configure:3022: result: no configure:2992: checking for gcc configure:3008: found /usr/bin/gcc configure:3019: result: gcc configure:3050: checking for C compiler version configure:3059: gcc --version >&5 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3070: $? = 0 configure:3059: gcc -v >&5 Using built-in specs. Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib --with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) configure:3070: $? = 0 configure:3059: gcc -V >&5 gcc: '-V' option must have argument configure:3070: $? = 1 configure:3059: gcc -qversion >&5 gcc: unrecognized option '-qversion' gcc: no input files configure:3070: $? = 1 configure:3090: checking whether the C compiler works configure:3112: gcc conftest.c >&5 configure:3116: $? = 0 configure:3165: result: yes configure:3168: checking for C compiler default output file name configure:3170: result: a.out configure:3176: checking for suffix of executables configure:3183: gcc -o conftest conftest.c >&5 configure:3187: $? = 0 configure:3209: result: configure:3231: checking whether we are cross compiling configure:3239: gcc -o conftest conftest.c >&5 configure:3243: $? = 0 configure:3250: ./conftest configure:3254: $? = 0 configure:3269: result: no configure:3274: checking for suffix of object files configure:3296: gcc -c conftest.c >&5 configure:3300: $? = 0 configure:3321: result: o configure:3325: checking whether we are using the GNU C compiler configure:3344: gcc -c conftest.c >&5 configure:3344: $? = 0 configure:3353: result: yes configure:3362: checking whether gcc accepts -g configure:3382: gcc -c -g conftest.c >&5 configure:3382: $? = 0 configure:3423: result: yes configure:3440: checking for gcc option to accept ISO C89 configure:3504: gcc -c -g -O2 conftest.c >&5 configure:3504: $? = 0 configure:3517: result: none needed configure:3548: checking for style of include used by make configure:3576: result: GNU configure:3601: checking dependency style of gcc configure:3711: result: gcc3 configure:3731: checking how to run the C preprocessor configure:3762: gcc -E conftest.c configure:3762: $? = 0 configure:3776: gcc -E conftest.c conftest.c:13:28: error: ac_nonexistent.h: No such file or directory configure:3776: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | /* end confdefs.h. */ | #include configure:3801: result: gcc -E configure:3821: gcc -E conftest.c configure:3821: $? = 0 configure:3835: gcc -E conftest.c conftest.c:13:28: error: ac_nonexistent.h: No such file or directory configure:3835: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | /* end confdefs.h. */ | #include configure:3864: checking whether ln -s works configure:3868: result: yes configure:3875: checking whether make sets $(MAKE) configure:3897: result: yes configure:3949: checking for ranlib configure:3965: found /usr/bin/ranlib configure:3976: result: ranlib configure:4002: checking for bison configure:4018: found /usr/bin/bison configure:4029: result: bison -y configure:4046: checking for flex configure:4062: found /usr/bin/flex configure:4073: result: flex configure:4110: flex conftest.l configure:4114: $? = 0 configure:4116: checking lex output file root configure:4130: result: lex.yy configure:4135: checking lex library configure:4149: gcc -o conftest -g -O2 conftest.c >&5 /tmp/ccHy85aW.o: In function `input': /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/lex.yy.c:1168: undefined reference to `yywrap' /tmp/ccHy85aW.o: In function `yylex': /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/lex.yy.c:867: undefined reference to `yywrap' /tmp/ccHy85aW.o: In function `main': /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/conftest.l:17: undefined reference to `yywrap' collect2: ld returned 1 exit status configure:4149: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 35 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | #endif /* ! C99 */ | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 468 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | int yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | unsigned n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 652 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { yyless (input () != 0); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 7 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 8 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 9 "conftest.l" | ECHO; | YY_BREAK | #line 790 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), (size_t) num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register int number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | #ifndef __cplusplus | extern int isatty (int ); | #endif /* __cplusplus */ | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | int num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param bytes the byte buffer to scan | * @param len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 9 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:4149: gcc -o conftest -g -O2 conftest.c -lfl >&5 configure:4149: $? = 0 configure:4159: result: -lfl configure:4165: checking whether yytext is a pointer configure:4181: gcc -o conftest -g -O2 conftest.c -lfl >&5 configure:4181: $? = 0 configure:4189: result: yes configure:4252: checking for ifort configure:4268: found /usrx/local/intel/composer_xe_2011_sp1.11.339/bin/intel64/ifort configure:4279: result: ifort configure:4305: checking for Fortran 77 compiler version configure:4314: ifort --version >&5 ifort (IFORT) 12.1.5 20120612 Copyright (C) 1985-2012 Intel Corporation. All rights reserved. configure:4325: $? = 0 configure:4314: ifort -v >&5 ifort version 12.1.5 configure:4325: $? = 0 configure:4314: ifort -V >&5 Intel(R) Fortran Intel(R) 64 Compiler XE for applications running on Intel(R) 64, Version 12.1.5.339 Build 20120612 Copyright (C) 1985-2012 Intel Corporation. All rights reserved. configure:4325: $? = 0 configure:4314: ifort -qversion >&5 ifort: command line warning #10006: ignoring unknown option '-qversion' ifort: command line error: no files specified; for help type "ifort -help" configure:4325: $? = 1 configure:4334: checking whether we are using the GNU Fortran 77 compiler configure:4347: ifort -c conftest.F >&5 conftest.F(3): error #5082: Syntax error, found END-OF-STATEMENT when expecting one of: ( % [ : . = => choke me ---------------^ conftest.F(3): error #6218: This statement is positioned incorrectly and/or has syntax errors. choke me ---------------^ compilation aborted for conftest.F (code 1) configure:4347: $? = 1 configure: failed program was: | program main | #ifndef __GNUC__ | choke me | #endif | | end configure:4356: result: no configure:4362: checking whether ifort accepts -g configure:4373: ifort -c -g conftest.f >&5 configure:4373: $? = 0 configure:4381: result: yes configure:4463: checking for ifort configure:4479: found /usrx/local/intel/composer_xe_2011_sp1.11.339/bin/intel64/ifort configure:4490: result: ifort configure:4516: checking for Fortran compiler version configure:4525: ifort --version >&5 ifort (IFORT) 12.1.5 20120612 Copyright (C) 1985-2012 Intel Corporation. All rights reserved. configure:4536: $? = 0 configure:4525: ifort -v >&5 ifort version 12.1.5 configure:4536: $? = 0 configure:4525: ifort -V >&5 Intel(R) Fortran Intel(R) 64 Compiler XE for applications running on Intel(R) 64, Version 12.1.5.339 Build 20120612 Copyright (C) 1985-2012 Intel Corporation. All rights reserved. configure:4536: $? = 0 configure:4525: ifort -qversion >&5 ifort: command line warning #10006: ignoring unknown option '-qversion' ifort: command line error: no files specified; for help type "ifort -help" configure:4536: $? = 1 configure:4545: checking whether we are using the GNU Fortran compiler configure:4558: ifort -c conftest.F >&5 conftest.F(3): error #5082: Syntax error, found END-OF-STATEMENT when expecting one of: ( % [ : . = => choke me ---------------^ conftest.F(3): error #6218: This statement is positioned incorrectly and/or has syntax errors. choke me ---------------^ compilation aborted for conftest.F (code 1) configure:4558: $? = 1 configure: failed program was: | program main | #ifndef __GNUC__ | choke me | #endif | | end configure:4567: result: no configure:4573: checking whether ifort accepts -g configure:4584: ifort -c -g conftest.f >&5 configure:4584: $? = 0 configure:4592: result: yes configure:4831: checking if Fortran 90 compiler capitalizes .mod filenames configure:4839: ifort -c conftest.f90 >&5 configure:4842: $? = 0 configure:4849: result: no configure:4869: checking if double and float are ieee big endian configure:4914: gcc -o conftest -g -O2 conftest.c >&5 configure:4914: $? = 0 configure:4914: ./conftest configure:4914: $? = 1 configure: program exited with status 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | #define YYTEXT_POINTER 1 | #define GRIB_PTHREADS 0 | #define GRIB_LINUX_PTHREADS 0 | /* end confdefs.h. */ | | | int compare(unsigned char* a,unsigned char* b) { | while(*a != 0) if (*(b++)!=*(a++)) return 1; | return 0; | } | int main(int argc,char** argv) { | unsigned char dc[]={0x30,0x61,0xDE,0x80,0x93,0x67,0xCC,0xD9,0}; | double da=1.23456789e-75; | unsigned char* ca; | | unsigned char fc[]={0x05,0x83,0x48,0x22,0}; | float fa=1.23456789e-35; | | if (sizeof(double)!=8) return 1; | | ca=(unsigned char*)&da; | if (compare(dc,ca)) return 1; | | if (sizeof(float)!=4) return 1; | | ca=(unsigned char*)&fa; | if (compare(fc,ca)) return 1; | | return 0; | } | | configure:4925: result: no configure:4940: checking if double and float are ieee little endian configure:4985: gcc -o conftest -g -O2 conftest.c >&5 configure:4985: $? = 0 configure:4985: ./conftest configure:4985: $? = 0 configure:4999: result: yes configure:5033: checking if Big Endian configure:5058: gcc -o conftest -g -O2 conftest.c >&5 configure:5058: $? = 0 configure:5058: ./conftest configure:5058: $? = 0 configure:5069: result: no configure:5084: checking if inline in C configure:5104: gcc -c -g -O2 conftest.c >&5 configure:5104: $? = 0 configure:5115: result: yes configure:5127: checking if bus error on unaligned pointers configure:5150: gcc -o conftest -g -O2 conftest.c >&5 configure:5150: $? = 0 configure:5150: ./conftest configure:5150: $? = 0 configure:5161: result: no configure:5175: checking for posix_memalign configure:5175: gcc -o conftest -g -O2 conftest.c >&5 configure:5175: $? = 0 configure:5175: result: yes configure:5245: checking for _LARGEFILE_SOURCE value needed for large files configure:5264: gcc -o conftest -g -O2 conftest.c >&5 configure:5264: $? = 0 configure:5292: result: no configure:5327: checking for special C compiler options needed for large files configure:5372: result: no configure:5378: checking for _FILE_OFFSET_BITS value needed for large files configure:5403: gcc -c -g -O2 conftest.c >&5 configure:5403: $? = 0 configure:5435: result: no configure:5523: checking build system type configure:5537: result: x86_64-unknown-linux-gnu configure:5557: checking host system type configure:5570: result: x86_64-unknown-linux-gnu configure:5865: checking for jas_stream_memopen in -ljasper configure:5890: gcc -o conftest -g -O2 conftest.c -ljasper >&5 configure:5890: $? = 0 configure:5899: result: yes configure:5907: checking for opj_image_create in -lopenjpeg configure:5932: gcc -o conftest -g -O2 conftest.c -lopenjpeg >&5 /usr/bin/ld: cannot find -lopenjpeg collect2: ld returned 1 exit status configure:5932: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | #define YYTEXT_POINTER 1 | #define GRIB_PTHREADS 0 | #define GRIB_LINUX_PTHREADS 0 | #define IEEE_BE 0 | #define IEEE_LE 1 | #define IS_BIG_ENDIAN 0 | #define GRIB_INLINE inline | #define GRIB_MEM_ALIGN 0 | #define POSIX_MEMALIGN 1 | #define VECTOR 0 | #define MANAGE_MEM 0 | #define HAVE_FSEEKO 1 | #define GRIB_TEMPLATES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_SAMPLES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_DEFINITION_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions" | #define GRIB_TIMER 0 | #define OMP_PACKING 0 | #define HAVE_JPEG 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char opj_image_create (); | int | main () | { | return opj_image_create (); | ; | return 0; | } configure:5941: result: no configure:6759: checking for rm configure:6775: found /bin/rm configure:6786: result: rm configure:6837: checking for ar configure:6853: found /usr/bin/ar configure:6864: result: ar configure:6888: checking whether gcc supports -pedantic -Wall configure:6906: gcc -c -pedantic -Wall conftest.c >&5 configure:6906: $? = 0 configure:6914: result: yes configure:6934: checking for pow in -lm configure:6959: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 conftest.c:39: warning: conflicting types for built-in function 'pow' configure:6959: $? = 0 configure:6968: result: yes configure:6983: checking for dirent.h that defines DIR configure:7002: gcc -c -g -O2 conftest.c >&5 configure:7002: $? = 0 configure:7010: result: yes configure:7024: checking for library containing opendir configure:7055: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 configure:7055: $? = 0 configure:7072: result: none required configure:7139: checking for ANSI C header files configure:7159: gcc -c -g -O2 conftest.c >&5 configure:7159: $? = 0 configure:7243: result: no configure:7254: checking stddef.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking stddef.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for stddef.h configure:7254: result: yes configure:7254: checking stdlib.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking stdlib.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for stdlib.h configure:7254: result: yes configure:7254: checking string.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking string.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for string.h configure:7254: result: yes configure:7254: checking sys/param.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking sys/param.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for sys/param.h configure:7254: result: yes configure:7254: checking sys/time.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking sys/time.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for sys/time.h configure:7254: result: yes configure:7254: checking unistd.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking unistd.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for unistd.h configure:7254: result: yes configure:7254: checking math.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking math.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for math.h configure:7254: result: yes configure:7254: checking stdarg.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking stdarg.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for stdarg.h configure:7254: result: yes configure:7254: checking assert.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking assert.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for assert.h configure:7254: result: yes configure:7254: checking ctype.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking ctype.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for ctype.h configure:7254: result: yes configure:7254: checking fcntl.h usability configure:7254: gcc -c -g -O2 conftest.c >&5 configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking fcntl.h presence configure:7254: gcc -E conftest.c configure:7254: $? = 0 configure:7254: result: yes configure:7254: checking for fcntl.h configure:7254: result: yes configure:7267: checking for an ANSI C-conforming const configure:7332: gcc -c -g -O2 conftest.c >&5 configure:7332: $? = 0 configure:7339: result: yes configure:7347: checking for size_t configure:7347: gcc -c -g -O2 conftest.c >&5 configure:7347: $? = 0 configure:7347: gcc -c -g -O2 conftest.c >&5 conftest.c: In function 'main': conftest.c:81: error: expected expression before ')' token configure:7347: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | #define YYTEXT_POINTER 1 | #define GRIB_PTHREADS 0 | #define GRIB_LINUX_PTHREADS 0 | #define IEEE_BE 0 | #define IEEE_LE 1 | #define IS_BIG_ENDIAN 0 | #define GRIB_INLINE inline | #define GRIB_MEM_ALIGN 0 | #define POSIX_MEMALIGN 1 | #define VECTOR 0 | #define MANAGE_MEM 0 | #define HAVE_FSEEKO 1 | #define GRIB_TEMPLATES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_SAMPLES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_DEFINITION_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions" | #define GRIB_TIMER 0 | #define OMP_PACKING 0 | #define HAVE_JPEG 1 | #define HAVE_LIBJASPER 1 | #define HAVE_LIBM 1 | #define HAVE_DIRENT_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_MATH_H 1 | #define HAVE_STDARG_H 1 | #define HAVE_ASSERT_H 1 | #define HAVE_CTYPE_H 1 | #define HAVE_FCNTL_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((size_t))) | return 0; | ; | return 0; | } configure:7347: result: yes configure:7358: checking whether time.h and sys/time.h may both be included configure:7378: gcc -c -g -O2 conftest.c >&5 configure:7378: $? = 0 configure:7385: result: yes configure:7394: checking whether closedir returns void configure:7418: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 configure:7418: $? = 0 configure:7418: ./conftest configure:7418: $? = 0 configure:7428: result: no configure:7436: checking return type of signal handlers configure:7454: gcc -c -g -O2 conftest.c >&5 conftest.c: In function 'main': conftest.c:52: error: void value not ignored as it ought to be configure:7454: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | #define YYTEXT_POINTER 1 | #define GRIB_PTHREADS 0 | #define GRIB_LINUX_PTHREADS 0 | #define IEEE_BE 0 | #define IEEE_LE 1 | #define IS_BIG_ENDIAN 0 | #define GRIB_INLINE inline | #define GRIB_MEM_ALIGN 0 | #define POSIX_MEMALIGN 1 | #define VECTOR 0 | #define MANAGE_MEM 0 | #define HAVE_FSEEKO 1 | #define GRIB_TEMPLATES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_SAMPLES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_DEFINITION_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions" | #define GRIB_TIMER 0 | #define OMP_PACKING 0 | #define HAVE_JPEG 1 | #define HAVE_LIBJASPER 1 | #define HAVE_LIBM 1 | #define HAVE_DIRENT_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_MATH_H 1 | #define HAVE_STDARG_H 1 | #define HAVE_ASSERT_H 1 | #define HAVE_CTYPE_H 1 | #define HAVE_FCNTL_H 1 | #define TIME_WITH_SYS_TIME 1 | /* end confdefs.h. */ | #include | #include | | int | main () | { | return *(signal (0, 0)) (0) == 1; | ; | return 0; | } configure:7461: result: void configure:7471: checking for vprintf configure:7471: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 conftest.c:70: warning: conflicting types for built-in function 'vprintf' configure:7471: $? = 0 configure:7471: result: yes configure:7477: checking for _doprnt configure:7477: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 /tmp/cc9aBZKW.o: In function `main': /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/conftest.c:82: undefined reference to `_doprnt' collect2: ld returned 1 exit status configure:7477: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "src/grib_api.h" | #define PACKAGE_TARNAME "src-grib_api-h" | #define PACKAGE_VERSION " " | #define PACKAGE_STRING "src/grib_api.h " | #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" | #define PACKAGE_URL "" | #define GRIB_API_MAIN_VERSION 1.9.16 | #define GRIB_API_MAJOR_VERSION 1 | #define GRIB_API_MINOR_VERSION 9 | #define GRIB_API_REVISION_VERSION 16 | #define YYTEXT_POINTER 1 | #define GRIB_PTHREADS 0 | #define GRIB_LINUX_PTHREADS 0 | #define IEEE_BE 0 | #define IEEE_LE 1 | #define IS_BIG_ENDIAN 0 | #define GRIB_INLINE inline | #define GRIB_MEM_ALIGN 0 | #define POSIX_MEMALIGN 1 | #define VECTOR 0 | #define MANAGE_MEM 0 | #define HAVE_FSEEKO 1 | #define GRIB_TEMPLATES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_SAMPLES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" | #define GRIB_DEFINITION_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions" | #define GRIB_TIMER 0 | #define OMP_PACKING 0 | #define HAVE_JPEG 1 | #define HAVE_LIBJASPER 1 | #define HAVE_LIBM 1 | #define HAVE_DIRENT_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_MATH_H 1 | #define HAVE_STDARG_H 1 | #define HAVE_ASSERT_H 1 | #define HAVE_CTYPE_H 1 | #define HAVE_FCNTL_H 1 | #define TIME_WITH_SYS_TIME 1 | #define RETSIGTYPE void | #define HAVE_VPRINTF 1 | /* end confdefs.h. */ | /* Define _doprnt to an innocuous variant, in case declares _doprnt. | For example, HP-UX 11i declares gettimeofday. */ | #define _doprnt innocuous__doprnt | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char _doprnt (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef _doprnt | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char _doprnt (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub__doprnt || defined __stub____doprnt | choke me | #endif | | int | main () | { | return _doprnt (); | ; | return 0; | } configure:7477: result: no configure:7491: checking for bzero configure:7491: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 conftest.c:71: warning: conflicting types for built-in function 'bzero' configure:7491: $? = 0 configure:7491: result: yes configure:7491: checking for gettimeofday configure:7491: gcc -o conftest -g -O2 conftest.c -lm -ljasper >&5 configure:7491: $? = 0 configure:7491: result: yes configure:7634: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on g14a2 config.status:960: creating Makefile config.status:960: creating src/Makefile config.status:960: creating fortran/Makefile config.status:960: creating tools/Makefile config.status:960: creating definitions/Makefile config.status:960: creating samples/Makefile config.status:960: creating ifs_samples/grib1/Makefile config.status:960: creating ifs_samples/grib1_mlgrib2/Makefile config.status:960: creating ifs_samples/grib1_mlgrib2_ieee64/Makefile config.status:960: creating tests/Makefile config.status:960: creating examples/C/Makefile config.status:960: creating examples/F90/Makefile config.status:960: creating tigge/Makefile config.status:960: creating perl/GRIB-API/Makefile.PL config.status:960: creating perl/Makefile config.status:960: creating python/Makefile config.status:960: creating examples/python/Makefile config.status:960: creating src/config.h config.status:1180: executing depfiles commands configure:8969: Configuration completed. You can now say 'make' to compile the grib_api package, 'make check' to test it and 'make install' to install it afterwards. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-unknown-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_F77_set= ac_cv_env_F77_value= ac_cv_env_FCFLAGS_set= ac_cv_env_FCFLAGS_value= ac_cv_env_FC_set= ac_cv_env_FC_value= ac_cv_env_FFLAGS_set= ac_cv_env_FFLAGS_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_f77_compiler_gnu=no ac_cv_fc_compiler_gnu=no ac_cv_func__doprnt=no ac_cv_func_bzero=yes ac_cv_func_closedir_void=no ac_cv_func_gettimeofday=yes ac_cv_func_posix_memalign=yes ac_cv_func_vprintf=yes ac_cv_header_assert_h=yes ac_cv_header_ctype_h=yes ac_cv_header_dirent_dirent_h=yes ac_cv_header_fcntl_h=yes ac_cv_header_math_h=yes ac_cv_header_stdarg_h=yes ac_cv_header_stdc=no ac_cv_header_stddef_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_sys_param_h=yes ac_cv_header_sys_time_h=yes ac_cv_header_time=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-unknown-linux-gnu ac_cv_lib_jasper_jas_stream_memopen=yes ac_cv_lib_lex=-lfl ac_cv_lib_m_pow=yes ac_cv_lib_openjpeg_opj_image_create=no ac_cv_objext=o ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=gawk ac_cv_prog_CPP='gcc -E' ac_cv_prog_LEX=flex ac_cv_prog_RM=rm ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_F77=ifort ac_cv_prog_ac_ct_FC=ifort ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_f77_g=yes ac_cv_prog_f90_uppercase_mod=no ac_cv_prog_fc_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_search_opendir='none required' ac_cv_sys_file_offset_bits=no ac_cv_sys_largefile_CC=no ac_cv_sys_largefile_source=no ac_cv_type_signal=void ac_cv_type_size_t=yes am_cv_CC_dependencies_compiler_type=gcc3 grib_api_cv_prog_cc_pedantic__Wall=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run aclocal-1.11' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run tar' AR='ar' AUTOCONF='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run autoconf' AUTOHEADER='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run autoheader' AUTOMAKE='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run automake-1.11' AWK='gawk' CC='gcc' CCDEPMODE='depmode=gcc3' CFLAGS='-g -O2' CPP='gcc -E' CPPFLAGS='' CYGPATH_W='echo' DEFS='-DHAVE_CONFIG_H' DEPDIR='.deps' DEVEL_RULES='dummy.am' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' EMOS_LIB='' EXEEXT='' F77='ifort' F90_CHECK='examples/F90' F90_MODULE_FLAG='-I ' FC='ifort' FCFLAGS='-g' FFLAGS='-g' FORTRAN_MOD='fortran' GREP='' GRIB_API_INC='/nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/src' GRIB_API_LIB='/nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/src/grib_api.a' GRIB_API_MAIN_VERSION='1.9.16' GRIB_DEFINITION_PATH='/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions' GRIB_DEVEL='0' GRIB_SAMPLES_PATH='/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples' GRIB_TEMPLATES_PATH='/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples' IFS_SAMPLES_DIR='/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/grib_api/ifs_samples' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' JASPER_DIR='system' JPEG_TEST='jpeg.sh' LDFLAGS='' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBOBJS='' LIBS='-lm -ljasper ' LIB_JASPER='-ljasper' LIB_OPENJPEG='' LIB_PNG='' LN_S='ln -s' LTLIBOBJS='' MAKEINFO='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/missing --run makeinfo' MKDIR_P='/bin/mkdir -p' OBJEXT='o' OPENJPEG_DIR='system' PACKAGE='grib_api' PACKAGE_BUGREPORT='Software.Support@ecmwf.int' PACKAGE_NAME='grib_api' PACKAGE_STRING='src/grib_api.h ' PACKAGE_TARNAME='src-grib_api-h' PACKAGE_URL='' PACKAGE_VERSION='1.9.16' PATH_SEPARATOR=':' PERL='' PERLDIR='perl' PERL_INSTALL_OPTIONS='LIB=/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/perl' PERL_MAKE_OPTIONS='' PYTHON='' PYTHON_CHECK='' PYTHON_DATA_HANDLER='' PYTHON_EXEC_PREFIX='' PYTHON_PLATFORM='' PYTHON_PREFIX='' PYTHON_VERSION='' RANLIB='ranlib' RM='rm' SET_MAKE='' SHELL='/bin/sh' STRIP='' UPPER_CASE_MOD_FALSE='' UPPER_CASE_MOD_TRUE='#' VERSION='1.9.16' WARN_PEDANTIC='-pedantic -Wall' WERROR='' WITH_PERL_FALSE='' WITH_PERL_TRUE='#' WITH_PYTHON_FALSE='' WITH_PYTHON_TRUE='#' YACC='bison -y' YFLAGS='' ac_ct_CC='gcc' ac_ct_F77='ifort' ac_ct_FC='ifort' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host='x86_64-unknown-linux-gnu' host_alias='' host_cpu='x86_64' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /nwprod/wsr.v3.0.0/libs/grib_api-1.9.16-working/config/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='/bin/mkdir -p' oldincludedir='/usr/include' pdfdir='${docdir}' pkgpyexecdir='' pkgpythondir='' prefix='/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16' program_transform_name='s,x,x,' psdir='${docdir}' pyexecdir='' pythondir='' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "src/grib_api.h" #define PACKAGE_TARNAME "src-grib_api-h" #define PACKAGE_VERSION " " #define PACKAGE_STRING "src/grib_api.h " #define PACKAGE_BUGREPORT "Software.Support@ecmwf.int" #define PACKAGE_URL "" #define GRIB_API_MAIN_VERSION 1.9.16 #define GRIB_API_MAJOR_VERSION 1 #define GRIB_API_MINOR_VERSION 9 #define GRIB_API_REVISION_VERSION 16 #define YYTEXT_POINTER 1 #define GRIB_PTHREADS 0 #define GRIB_LINUX_PTHREADS 0 #define IEEE_BE 0 #define IEEE_LE 1 #define IS_BIG_ENDIAN 0 #define GRIB_INLINE inline #define GRIB_MEM_ALIGN 0 #define POSIX_MEMALIGN 1 #define VECTOR 0 #define MANAGE_MEM 0 #define HAVE_FSEEKO 1 #define GRIB_TEMPLATES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" #define GRIB_SAMPLES_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/samples" #define GRIB_DEFINITION_PATH "/nwprod/wsr.v3.0.0/libs/ecmwf_grib_api-1.9.16/share/definitions" #define GRIB_TIMER 0 #define OMP_PACKING 0 #define HAVE_JPEG 1 #define HAVE_LIBJASPER 1 #define HAVE_LIBM 1 #define HAVE_DIRENT_H 1 #define HAVE_STDDEF_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_SYS_PARAM_H 1 #define HAVE_SYS_TIME_H 1 #define HAVE_UNISTD_H 1 #define HAVE_MATH_H 1 #define HAVE_STDARG_H 1 #define HAVE_ASSERT_H 1 #define HAVE_CTYPE_H 1 #define HAVE_FCNTL_H 1 #define TIME_WITH_SYS_TIME 1 #define RETSIGTYPE void #define HAVE_VPRINTF 1 #define HAVE_BZERO 1 #define HAVE_GETTIMEOFDAY 1 configure: exit 0 ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status Makefile on g14a2 config.status:960: creating Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status src/Makefile depfiles on g14a2 config.status:960: creating src/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status src/config.h on g14a2 config.status:960: creating src/config.h ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status tools/Makefile depfiles on g14a2 config.status:960: creating tools/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status definitions/Makefile on g14a2 config.status:960: creating definitions/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status samples/Makefile on g14a2 config.status:960: creating samples/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status ifs_samples/grib1/Makefile on g14a2 config.status:960: creating ifs_samples/grib1/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status ifs_samples/grib1_mlgrib2/Makefile on g14a2 config.status:960: creating ifs_samples/grib1_mlgrib2/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status ifs_samples/grib1_mlgrib2_ieee64/Makefile on g14a2 config.status:960: creating ifs_samples/grib1_mlgrib2_ieee64/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status tests/Makefile depfiles on g14a2 config.status:960: creating tests/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status tigge/Makefile depfiles on g14a2 config.status:960: creating tigge/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status fortran/Makefile depfiles on g14a2 config.status:960: creating fortran/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status examples/C/Makefile depfiles on g14a2 config.status:960: creating examples/C/Makefile config.status:1180: executing depfiles commands ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status examples/F90/Makefile on g14a2 config.status:960: creating examples/F90/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status python/Makefile on g14a2 config.status:960: creating python/Makefile ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by src/grib_api.h config.status , which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status examples/python/Makefile depfiles on g14a2 config.status:960: creating examples/python/Makefile config.status:1180: executing depfiles commands